Larson Electronics Hazardous Location Lighting - 300 Watts - 60 LEDS - Class 1, Division 2 - Trunnion Mount

Made in the USA The extremely durable Larson Electronics HAL-PRM-300W-LED LED hazardous area light produces exceptional illumination from a 300 watt LED lamp. Constructed of die cast aluminum and U.L. listed for wet areas, this LED fixture is a versatile and ideal hazardous area lighting solution for areas where wet or damp environments may be encountered. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** The durable HAL-PRM-300W-LED LED light fixture is suitable for use in wet outdoor environments, making it an ideal lighting solution for industrial applications, boat docks, building exteriors and outdoor work areas. The lamp housing is weather resistant and constructed of pressure cast copper free aluminum with an architectural bronze Polyester finish. The lens door is pressure-cast copper-free aluminum, and secured with 1/4” diameter captive stainless steel slotted hex-head bolts. This hazardous location light contains sixty CREE XLamp XPG¨ five watt LEDs producing 493 lumens each. These LEDs are arranged in rows and paired with high purity optics to produce a 60 degree flood beam while only drawing 2.5 amps on 120V, making these units ideal for use as highly efficient yet powerful work and area lights. These lights can also be ordered in a spot configuration for a tighter beam with longer reach and intensity.The HAL-PRM-300W-LED hazardous location LED light is an ideal replacement for fragile and hot running 1000 watt metal halide floodlights. They offer Pulse Width Modulation control, cooler operation, low power requirements, high durability and a versatile mounting system that makes these LED floodlights superior lighting solution for industrial and commerical applications where power and reliability is critical. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. PWM Control: The pulse width modulation drivers in this unit prevent excessive heat buildup which reduces LED life and also provide secondary benefits through the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. Durability: As well as unparalleled heat control, the HAL-PRM-300W-LED series of LED floodlights from Larson Electronics also offer IP65 rated construction that is designed to withstand demanding environmental and operating conditions. These units can withstandtemperatures of -40 degrees Celsius to 80 degrees Celsius, are IP65 rated waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from cast aluminum and the lenses are tempered glass. All hardware on this unit is corrosion resistant and the die-cast aluminum exterior has an electro-coat dark bronze paint finish. The CREE XLamp XPG¨ LEDs help these units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications where a lot of dust, dirt, dampness and abusive working conditions are encountered. Mounting choices:(1) Yoke mount: zinc plated steel yoke with architectural bronze Polyester finish.(2) Poletop mount: built-in slip-fitter for internal wiring. Adjustable laterally and vertically. Slip fits 2” or 2 1/2” pipe. Architectural bronze Polyester finish. This hazardous area light is rated U.L. standard 844 and 1598 compliant, approved Class 1 Division 2, Groups A,B,C,D, and functionable in an environment of up to 180 degrees celcius. Made in the USA Quality Superior LED Benefits 1. High Efficiency LED lamp.2. 98 Lumens per Watt3. Rugged Pressure Cast Aluminum Housing.4. Thermal Shock and Impact Resistant Glass Lens Door.5. Heavy Duty Door Gasket.6. Low Maintenance.7. Slip Fit Pole Mount or Zinc Plated Yoke Mount.8. Heavy Duty High Heat Silicone Door Glass Seal. 9. Architectural Bronze Polyester Finish. 1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information HAL-PRM-300W-LED U.L Ratings Lamp Type: CREE XLamp XPG¨ LEDs Class I, Division 2 Groups A, B, C, D Dimensions: 17 " W X 7" D X 20 3/4" H UL Standard 1598 (supersedes UL Standard 57) Watts: 300 UL Standard 844 Lumens Per Watt: 98 Class I Div. 2 UL Standard 1598A Voltage: 120-277V AC, 12VDC, 24VDC Max OP Temp 325¡C (T1 NEC ID Number) Lighting Configuration: Spot or Flood Pattern Operating temperature 325 degrees C (T1) Mounting: Slip Fit Pole Mount or Zinc Trunnion Weight: 29.7 lbs U.L. Listing: Wet Area Approved Total Lumens: 29,580 Special Orders- Requirements Wiring: 3/4 inch Threaded NPT Conduit Entrance Contact us for special requirements Toll Free: 888-325-4448 E-mail: [email protected] Scroll Down to Purchase-