Larson Electronics Hazardous Location Area Fluorescent Light - 2 foot 2 lamp - Class 1 Division 2 Groups A-D

Made in the USAThe Larson Electronics HAL-24-2L Hazardous Area Fluorescent Light Fixture is Class 1 Division 2 Groups A, B, C and D - NRTL Certified to UL 1598A, has a T4A temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered.The HAL-24-2L fixture is a 2 foot long, 2 lamp, Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a good choice for use in applications where space is at a premium. This fixture is T4A temperature rated, comes standard with F24-T5/HO bulbs, and is available with optional T12/HO and T8/841 bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeSurface Mount (Standard)Pendant Mount (Optional)This fixture is multi-voltage capable and is NRTL Certified to UL 595 and UL 1598A Marine Type for use marine environments. The HAL-24-2L provides operators in hazardous locations with a compact, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present.NOTE ON LAMPS: This fixture comes equipped with F24-T5HO/–24 Watt lamps producing 2,000 lumens per bulb, a 4100 Kelvin color and a 20,000 hour rated service life. We offer F24-T12/HO – 1650 lumens per bulb, F17-T8/ – 1325 lumens per bulb, and F24-T12-D-HO – 1650 lumens per bulb 3300 lumens tubes as lamp options for this fixture. The HAL-24-2L has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ.Standard Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface.Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.Made in USA Quality Lamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. 1/2" or 3/4", threaded access hole for wiring conduit. 7. Units can be wired end to end in series.F24-T5/HO –24 Watt, 2000 lumens per bulb, 20,000 hours life, 4100 Kelvin color F24-T12/HO – 1650 lumens per bulb (3300 lumens) 9,000 hours life, 4100 Kelvin color F17-T8– 1325 lumens per bulb (2650 lumens total), 24,000 hours life, 4100 Kelvin color. Specifications / Additional Information HAL-24-2L Hazardous Area U.L. Ratings HAL-24-2L Hazardous Area U.L. RatingsDimensions: W-7" L-25.5 " H-6 1/8 " NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Weight: 17 Lbs NRTL Certified to UL 1598A Marine TypeTotal Watts: 48 watts* Temp Rating: T4AVoltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz California Title 24 CompliantTotal Lumens: STD-T5-HO Bulbs 4,000 Class 1 Division 2, Groups A, B, C, DLamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours Efficiency: STD-T5-HO Bulbs 83 Lumens per Watt Operating Temp Range: T4A Rated -30 C to 70 CMinimum Operating Temp: -30 CMaximum Case Temp: 90 C Beam Angle: N/A Special Orders- RequirementsColor Temp: 4100K- Contact us for special requirementsMounting: Bracket Standard Toll Free: 888-325-4448Wiring Hub: 1/2" or 3/4" threaded Intl: 1-903-270-1187? E-mail: [email protected]*Wattage totals are lamps only and may vary with different lamps.