Larson Electronics Handheld LED Emitter Light - 200lb Grip Magnet - 2160 Lumens -550'L X 90'W - 12/24 Volts - Cig Plug

Buy American Compliant The Larson Electronics ML-12LED-CP LED Light Bar offers high light output and a compact profile combined with versatile finger grip handle and magnetic base. This IP67 rated LED light bar is waterproof to one meter and produces 2,160 lumens while drawing only 36 watts of power @3 amps from a 12 volt electrical system. This light can run on any voltage from 9 to 42 VDC and provides a durable and compact lighting solution that is ideal for use in hunting, security and law enforcement applications, marine environments and as vehicle and heavy equipment illumination. The ML-12LED-CP LED light bar from Larson Electronics produces a 550` long by 70` wide light beam with 2,160 lumens of bright light. Twelve Edison Edixeon¨ Emitters containing CREE EZBright¨ three watt LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light bars are IP67 rated and waterproof to 1 meter, sealed against intrusion by dust and dirt and ruggedly constructed to withstand demanding environments, conditions and applications. The entire Larson Electronics LEDLB series are constructed of extruded aluminum and feature low profile compact housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. This particular unit comes standard with a 200lb magnetic base attached to a handle which is then attached to the LED10W fixture for quick and easy installation. A 12ft. Deutch connector coil cord ending in a cigarette plug adapter equipped with a rocker switch is also included which makes it ideal for mobile applications. This image shows a dark street, illuminated by nothing but distant street lamps and suburban lighting. The same street illuminated with the ML-12LED-CP, easily reaching the street light over 500` away. The cigarette plug on the detachable cord contains a rocker switch which controls power to the LED light. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon¨ Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours. Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and standalone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical. ML-12LED-CP LED 35¡ Flood Beam(Opt) ML-12LED-CP LED 10¡ Spot Beam(Stnd) Durability: The LEDLB series of LED light bars from Larson Electronics offer IP67 rated construction that is designed to withstand the rigors of demanding of environmental and operating conditions yet are lighter and smaller than our LEDLBE series of extreme duty light bars. The LEDLB series is designed to provide a low profile, light weight, high performance light bar that can be mounted where other lights will not fit. These units can operate in temperatures of -40 degrees Celsius to 80 degrees Celsius, are waterproof to 1 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon¨ LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. Mounting: This particular unit comes standard with a handle that contains a single 200lbs grip magnet, allowing users to quickly and easily install and position this light, then remove it and install it in another location or on another vessel as needed. A 12ft coil cord with cigarette plug adapter is included to maximize the portability of this unit. The cigarette plug adapter on this unit has an integrated rocker switch which allows the user to power the unit on and off at the plug. Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors. Specifications / Additional Information ML-12LED-CP LED Light Bar LEDLB LED Features LEDs: 12 Edixeon¨ 3 Watt LED Emitters Edixeon¨ 3 Watt LED Emitters Dimensions:Light Bar Only: 8"-L 2.75"-H 3"-D LEDs Driven At 80% Watts: 36 -40 C~ +80C Operating Temp Range Voltage: 9-46 VDC RoHS Compliant Weight: 2.5 Lbs 70% Lumen Retention @65,000 hours Lighting Configuration: 10¡ Spot or 35¡ Flood LED Chip Op Temp -40C to +125C Mounting: Finger Grip Handle Magnetic Base IP67 Rated Waterproof to 1 meter Wiring: Cigarette Plug Amps: 3 (on 12 volts) 1.5 (on 24 volts) Lumens: 2160 Special Orders- Requirements LED Light Color: 6000K Contact us for special requirements LED Life Expectancy: 50,000 hours Toll Free: 888-325-4448 Optics Efficiency: 90% Materials: Aluminum Housing, Polycarbonate Lens E-mail: [email protected] Housing Color: Black Lux-Spot : @Lens: 192,900 @ 1 Meter 17,000 Lux-Flood : @Lens: 186,500 @ 1 Meter 1,930 CE Certified 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-