Larson Electronics Flameproof Receptacle, 2-Pole 3-Wire, 16 Amp, 220V AC, ATEX IEC-Ex Rated

The Larson Electronics HLO-EX-16A-2P3W-24V Single Phase Hazardous Location Receptacle is a Class 1, Division 2 and Class 2, Divisions 1 & 2 rated receptacle approved for use in hazardous environments where flammable or explosion gases, vapors, or dusts stand the potential to exist and where flammable dusts, fibers, or flyings exist. This 2-pole, 3-wire outlet is designed to provide a secure connection for electrical equipment within the hazardous location.This hazardous location 2-pole 3-wire receptacle is compatible with our HLP-EX-16A-2P3W-24V hazardous location power plugs. This outlet is rated for 16 amps and is ptb 03 ATEX 1227 rated. This receptacle is coded blue to indicate its voltage rating and ground pin position of 6. The color coding of these units makes it impossible to connect different voltages and current ratings, to ensure safe power connection. This single phase receptacle contains a 3 horsepower disconnect switch. The circuit cannot be energized until the plug is inserted and the switch is turned to the on position, and an interlocking switch mechanism feature prevents accidental removal of the plug from the receptacle during operation. The switch can be padlocked in the on or off position.This hazardous location outlet features polyamide construction and a maximum voltage rating of 24V AC @ AC/AC. With NEMA Type 3, 4, 4x and IP66 ratings, this receptacle is suitable for outdoor, marine and wet location. This hazardous location single phase receptacle has a 2 wire 16-6 AWG terminal capacity and a _” NPT bottom entry. This unit has a short circuit current rating of 6kA sym RMS and operates with a T6 ambient temperature rating of -50¼C to +55¼C.Suggested Applications: Chemical and pharmaceutical manufacturing, petrochemical operations, offshore applications, coal mining and other refinery or industrial operations. HLO-16A-2P3W-24V Explosion Proof Outlet Certifications - ComplianceAmp Rating: 16 Class I, Division 2, Groups A, B, C, DDimensions: 9.13H x 4.13W x 6.6D Class I, Zone 1 & 2, Groups IIC, IIB, IIAConfiguration: 2-Pole 3-Wire Class II, Div 1 & 2, Groups E, F, GConduit: Bottom Entry 3/4" NPT Class IIIHorsepower: 3HP @ 24V NEMA 3, 4, 4XCompatibility: HLP-EX-16A-2P3W-24V IP66 WaterproofProtection: Interlocking Switch Mechanism & Padlockable ATEX RatedHub Size: 3/4" NPT IECEx Zones 1, 2, 21 & 22Terminal Capacity: 2 Wires 16-6 AWG Ambient Temp Rating: -50¼C to +55¼C Special Orders- RequirementsVoltage: 24V AC @ AC/AC Contact us for special requirementsToll Free: 888-325-4448Fax: 1-903-498-3364E-mail: [email protected]