Larson Electronics Explosion Proof Traffic Light w/ Remote Control - Class I, II, III - Red, Amber, Green - Stop/Go

The EPL-TL-3X10W-C-EXWR Explosion Proof Traffic Light w/ Remote Control from Larson Electronics is designed for combustible facilities and is approved for use in wet locations and marine environments. Equipped with a wireless remote, this explosion proof LED stack light is designed for routing traffic and signaling, and visual indications in industrial refueling stations and process status indication in manufacturing facilities. The EPL-TL-3X10W-C-EXWR is an ideal indicator lighting solution for industrial refueling stations and manufacturing facilities. This explosion proof fixture is configured for red, amber and green output (one lamp each color). The lamps are protected by Pyrex globes and cast aluminum globe guards. The LED lights in this traffic light are 10 watts each and offer cool operation and clean bright output that surpasses that of 100 watt incandescent indicator lamps. The light housings are constructed with a polyester powder coated copper free aluminum casting that can withstand 1490 pounds PSI hydrostatic pressure. The mounting plate is constructed of non-sparking aluminum and can be custom built to customer specifications. This explosion proof red and green indicator light has a 50,000+ hour operational life and is available in 120-277V AC and 11 or 24V DC or V AC configurations for standard or low voltage operation. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge This explosion proof LED stack light carries a T3C temperature rating and has a -40¡C to +85¡C ambient operating temperature range. Individual leads per lamp allow independent operation, making this unit ideal for fuel depots and manufacturing facilities where status indicators are necessary. The individual leads can be connected to user provided terminal blocks or existing indicator systems. Unlike traditional indicator lamps that use a colored globe with low color temperature incandescent lamps, this explosion proof LED stack light incorporates a clear glass globe and colored LED lamps. By utilizing colored LEDs instead of tinted lenses or globes, the total visibility and light output is increased when compared to traditional colored lamps. This is particularly important for strobe configurations, increasing the peak candela of the signal during indications. The standard lamp configuration is red, amber, and green LED bulbs in a steady burn or strobing configuration. We offer a large assortment of lamp color options including red, green, blue, amber, purple, and white LED lamps. Please contact us for special lamp configurations. These stack lights can also be configured with audible horns. Commonly used color codes for indicators: Red: Stop / Failure conditions, such as an emergency stop or machine fault Yellow: Caution / Warnings, such as over-temperature or over-pressure conditions Green: Go / Normal machine or process operation Blue: External help request / Operator/Supervisor required / Maintenance personnel assistance required White: User-defined conditions specific to application and environment Wireless Remote: The EPL-TL-3X10W-C-EXWR comes with an explosion proof wireless remote with a range of 200 feet. This wireless component is of a single button design, which can be used to change light colors on the signal-stack system. Pressing the button on the remote cycles through the available colors. Wiring: Line-in supply power is provided by 10` of 16 AWG SOOW cable with flying leads. Mounting: Mounting is provided by a heavy gauge aluminum back plate fabricated from copper free aluminum with four predrilled holes designed to be bolted to walls, ceilings, and flat surfaces for permanent and secure attachment. Note on Lights: Please note, the color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-TL-3X10W-C-EXWR Explosion Proof LED Stack Light Ratings/Approvals Listing: United States & Canada Class I, Division 1&2 Groups C, D Lamp Technology: LED Class II, Division 1&2 Groups E, F, G Dimensions: - Class III Lamp Quantity: 3 IP67 (Water proof) Weight: - T3C Temperature Rating Voltage: 120-277V AC, 11-24V AC or DC New York City Department of Buildings approved Frequency: - Total Watts: 30W Single Lamp Watts: 10W Minimum Lumens: - Maximum Lumens: - Luminous Efficacy: - Lamp Life: 50,000+ Hours Colors: Red, Amber, Green (other color configurations available upon request) Color Rendering Index: - Lamp Type: - Lamp Base: - Replacement Lamp: - Beam Angle: Full, 360¡ Lighting Pattern: Steady Burn or Strobe Light Color Control: Wireless Remote Wireless Remote Distance: 200 Feet Ambient Operating Temp Range: - Temp Rating: T3C Special Orders- Requirements Housing Material: Aluminum Base Contact us for special requirements Finish: - Toll Free: 888-325-4448 Lens Material: - Intl: +01-903-498-3364 Mount: Predrilled Aluminum Flat Surface Mounting Bracket Fax: 1-903-498-3364 Wiring: 10` 16 AWG Cable w/ Flying Leads E-mail: [email protected] Scroll Down to Purchase