Larson Electronics Explosion Proof Portable Power Distribution - 120V Primary - 12/24V Secondary - (10) 12/24V Outlets

Made in the USA The Larson Electronics EPL-SBOPDP-120-10XLV explosion proof portable power distribution system provides ten 20-amp, breaker protected, explosion proof outlets with 200-amp main breaker protection. This portable power distribution panel system gives operators the ability to access a 120 volt single phase source voltage (via 25-foot line-in cable) and run up to ten separate 12V or 24V volt tools. This wheeled power distribution system allows operators to safely operate up to 24,000 watts of lighting and electrical equipment within Class I Division 1 environment. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The EPL-SBOPDP-120-10XLV portable explosion proof power distribution system is designed to provide operators using 12V or 24V equipment in hazardous locations with ten 20-amp power receptacles within a hazardous location environment. This unit includes ten explosion proof twist lock receptacles rated at 20-amps maximum each. This compact power distribution system is designed for portability and convenience as well as durability and is mounted within a wheeled, non-sparking aluminum frame for added protection. Operators provide 120V service from inside or outside the hazardous location to the 24,000 watt system via the provided 25` 1/0 4C Type-W line-in cable with blunt cut end. The output side is equipped with ten low voltage 12V or 24V, Class I & 2, Divisions 1 & 2 receptacles designed to accept 15-amp and 20-amp twist lock plugs like our EPP-15A and EPP-20A explosion proof plugs. The class rated power distribution assembly is mounted onto a rugged cart style frame constructed of non-sparking aluminum tubing and powder coated for added corrosion resistance. Mobility is provided by locking front casters and run flat rear tires, allowing operators to wheel this temporary power system between job sites within the hazardous environment. Larsonelectronics.com can build transformers to your specifications. If this model does not meet your needs, please contact us at 888-325-4448 [email protected]. Specifications / Additional Information EPL-SBOPDP-120-10XLV Explosion Proof Power Distribution Amps Line-In Cable: 25` 1/0 4C Type-W w/ Blunt Cut End Max Primary OCP: 200 amps @ 120V Line-In Voltage: 120V AC Ratings Primary Panel: 200A MB panel w/ 10X20A 1P Breakers Class 1 & 2, Divisions 1 & 2 Line-Out Voltage: 12V or 24V AC or DC UL 1640 Line Out: (10) 20 amp C1D1 12/24V Twist Lock Receptacles Dimensions: 30"-H x 14"-D x 24"- W Special Orders- Requirements Form Factory: Portable Dolly Cart with Wheels Contact us for special requirements Toll Free: 888-325-4448 E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase