Larson Electronics Explosion Proof Panelboard - 3P3W, 480V 3PH - 100A MLO - (6) 15A 3P Breakers - (16) NPT Hubs

The EPPB-3P3W-480V-100AML-18CKT-6X15A.3P-BV-DV Explosion Proof Panelboard offers circuit management and protection in hazardous locations and indoor/outdoor work sites. The 100-amp rated main lug only panel is compatible with 480V AC three phase and comes with six, 15-amp 3-pole breakers. This 18-circuit panel is constructed of copper-free aluminum with 316 stainless steel cover bolts. The EPPB-3P3W-480V-100AML-18CKT-6X15A.3P-BV-DV is a rugged explosion proof panelboard, with a 3-pole, 3-wire configuration, for applications in hazardous locations and explosive work sites. This main lug only unit comes with a 100-amp rating and supports three phase 480V AC. The 18-circuit panel is furnished with copper buss, with padlocking main/branch breaker handles. Operators can access a total of six, 15-amp 3-pole breakers. This panelboard is constructed of copper-free aluminum (less than 4/10 of 1%), with 316 stainless steel cover bolts. Drain and breather valves without centers are included with the unit. A NEMA 4X rating ensures protection against corrosion from water and the formation of ice, the ingress of dust and external foreign objects. The explosion proof panelboard suitable for use in Class I, Divisions 1 & 2; Class I, Zones 1 & 2; Class II, Divisions 1 & 2; and Class III work sites. Hubs: The explosion proof unit contains two, 3" NPT hubs and fourteen, 1" NPT hubs (total of 16 NPT hubs). One 3" NPT hub and two 1" NPT hubs are located at the top of the unit; and one 3" NPT hub and one 1" NPT hub can be found at the bottom. The left side of the enclosure contains six 1" NPT hubs; and the right side of the unit features five 1" NPT hubs. Mount: The EPPB-3P3W-480V-100AML-18CKT-6X15A.3P-BV-DV is compatible with wall or surface mounting configurations. Applications: Hazardous locations, oil and gas facilities, petroleum refineries, chemical processing, lighting systems, overcurrent protection, short circuit protection and more. Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units If this model does not meet your needs, please contact us at 888-325-4448 [email protected] Specifications / Additional Information EPPB-3P3W-480V-100AML-18CKT-6X15A.3P-BV-DV Explosion Proof Panelboard Ratings/Approvals Unit Type: Explosion Proof Lighting Panelboard w/o MB Class I, Divisions 1&2 Groups B,C,D Dimensions: 45 3/8" x 33" x 16 7/8" Class I, Zones 1&2 Groups IIB+H2,IIA Weight: 229.6 lbs Class II, Divisions 1&2 Groups E,F,G Primary Voltage: 480V 3PH Class III Panel Type: Main Lug Only NEMA 3, 4, 4X, 7(B,C,D), 9(E,F,G) Main Panel Amp Rating: 100 Amps Wire System: 3P3W Circuits: 18 Breakers: (6) 15A 3P Special Orders- Requirements Materials: Copper-free Aluminum, 316 SS Cover Bolts Contact us for special requirements Mount: Wall or Surface Phone: 1-214-616-6180 Hub Qty/Sizes: (2) 3" NPT, (14) 1" NPT Toll Free: 888-325-4448 Hub Configuration: (1) 3" NPT @ Top, (1) 3" NPT @ Bottom; (2) 1" NPT @ Top, (1) 1" NPT @ Bottom, (6) 1" NPT @ Left, (5) 1" NPT @ Right Fax: 1-903-498-3364 Valves: Breather + Drain Valves w/o Center E-mail: [email protected] *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*