Larson Electronics Explosion Proof LED Paint Spray Booth Light w/ 75' Cord - 2nd Gen - Class 1 Div 1 - Class 2 Div 1

Made in the USA The Larson Electronics EPL-48-2L-LED-G2-75C Explosion Proof LED Light Fixture is NRTL Listed for United States and Canada, Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light has a T-6 temperature rating and a carries a paint spray booth light certification as well.The EPL-48-2L-LED-G2-75C is equipped with specially designed LED T-series bulbs which produce 30% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. We have replaced two 8 foot dual lamp T8 fixtures in our own facility with our LED T series lamps and produced more illumination in the work area with only one 2 lamp 4 foot long LED fixture. We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance.Click Photo to EnlargeClick Photo to EnlargeWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard T8 bulbs.The 28 watt LED lamps produce more illumination than standard T8 bulbs. This LED version, with a total of 56 watts, draws only 0.5 amp. The EPL-48-2L-LED-G2-75C is multi-voltage (universal) and operates on any voltage from 120V to 277V AC 50/60hz. We also make a 12/24VDC version for low voltage applications (-LV suffix) for DC power.Energy Consumption Comparison? T5HO T8 LEDWattage 108 watts 64 watts 56 wattsAmp Draw @ 120V AC 0.9 amps 0.54 amps 0.47 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.20 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 4.67 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 2.34 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursColor Temperature 5000K / 4100K 4100K 5300KOperation cost per year(8hs/day @ 11c/kWh) $34.69 $20.56 $17.99Our EPL-48-2L-LED-G2-75C LED ligh fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. This unit is equipped with 75 foot SOOW cord terminated in a 15 amp explosion proof 5-15 plug.Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown below illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fixture. Additional mounting options:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).Made in USA Quality Superior LED Benefits1. Each unit dialectrically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap. 7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection?1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing.11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety.EPL-48-2L-LED-G2-75C Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and D T6Dimensions: W-11.25" L-52" H-8.5 " Class 1 Division 2, Group A,B,C,DWeight: 45 Lbs NRTL Certified to UL 595 Marine Type (Saltwater)Total Watts: 56 watts NRTL Certified to UL 844, 924Total Lumens: 5500 NRTL Certified to UL 1598 Marine TypeVoltage: Universal 120-277VAC 50/60 hz or 12-24V Class 2, Division 1 - 2, Groups E,F,GLED Lamp Life Expectancy: 50,000+ Hours Certified Canadian StandardsEfficiency: 98.21 Lumens per Watt Listed for Paint Spray BoothsAmbient Operating Temp Range:-30 C to 85 C California Title 24 CompliantOperating Temp Rating: T6 Rated Minimum Operating Temp: -30 C Maximum Case Temp: 90 C Beam Angle: 150 degrees Color Temp: 5600K Special Orders- RequirementsColor Rendering Index: 80 Mounting:Surface Standard - Pendant Optional Contact us for special requirementsWiring: 75ft Cord - EXP Plug Toll Free: 888-325-4448Intl: 1-903-270-1187E-mail: [email protected]