Larson Electronics Explosion Proof LED Paint Spray Booth Light Fixture - Class 1 Div 1 - Class 1 Div 2 - T6 - NO LAMPS

Made in the USAThe Larson Electronics EPL-24-2L-LED-NL (NO LAMPS) Explosion Proof LED Light Fixture is NRTL Listed United States and Canada approved Class I Division 1 & 2 and Class II Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.This four foot LED fixture can hold two lamps and is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-24-2L-LED-NL is compatible with Larson Electronics specially designed LED T-series bulbs. Our LED-T series bulbs are visibly brighter than standard T8`s and have consistently surprised many of our customers with their unexpectedly high light output levels.This explosion proof LED linear fixture is lighter in weight and has a slimmer profile than traditional explosion proof fluorescent fixtures. The EPL-24-2L-LED-NL has a max wattage of 24W per lamp for operator provided internal driver LED lamps.This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeOur EPL-24-2L-LED-NL light fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.Mounting Options:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Surface Mount (Standard)Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeAdjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Pendant Mount (Optional)Click Photo to Enlarge3 Conduit PositionsClick Photo to EnlargeSuspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.Suggested Applications:Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional InformationEPL-48-2L-LED Explosion Proof LED Fixture Ratings/ApprovalsNRTL Listed for United States & Canada Class 1 Division 1 & 2, Groups C and DDimensions: 11.25"-W x 27.5"-L x 8.5"-H Class 2, Division 1 & 2, Groups E,F,GWeight: 45 Lbs NRTL Certified to UL 595 Marine Type (Saltwater)Voltage: - NRTL Certified to UL 844Max Wattage: - NRTL Certified to UL 1598 Marine TypeBeam Angle: - Certified Canadian StandardsAmbient Operating Temp Range:-30¡C to +85¡C Listed for Paint Spray BoothsOperating Temp Rating: T6 Rated California Title 24 CompliantMinimum Operating Temp: -30¡C IP67 Rated - WaterproofMaximum Case Temp: +90¡C T6 Temperature RatingHousing Material: Cast Aluminum End Caps and Reflectors - Copper Free NEMA 4XGasket Material: Buna Rubber O-Rings Approved for Confined SpacesMounting: Surface Standard - Pendant Optional Silicone FreeWiring Hub: 1/2" NPT Factory Sealed FixtureMade in the USASpecial Orders- RequirementsContact us for special requirementsToll Free: 888-325-4448Intl: 1-903-270-1187E-mail: [email protected]