Larson Electronics Explosion Proof LED Drop Light - Transformer Steps Down 120/277VAC to 24VDC - 10W - 200ft Cord

Made in the USA The Larson Electronics EHL-LED-120XLV-200 Explosion Proof LED Drop Light / Trouble Light is UL Listed Class 1 Division 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. This 7 watt explosion proof LED work light from Larson Electronics produces 735 lumens of bright white light and comes complete with 200 feet of explosion proof cord. The EHL-EHL-LED-120XLV-200 LED drop light has no ballast and the housing is constructed of non sparking aluminum, which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. This explosion proof LED drop light is designed with a 12 volt or 24 volt LED bulb to operate with 12VDC or 24VDC current for low voltage operation. 100 Watt Incandescent Bulb With the EHL-LED-120X12-200 Click Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge This 7 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 735 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes with 200’ of SOOW 12/3 AWG. This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn`t need to drag the ballast housing around. This can be particularly annoying when the ballast becomes entangled in the cord. This explosion proof LED hand light operates on 24 Volts DC for for low voltage operations. An included inline transformer allows this unit to plug into a standard outlet and operate from 110-277VAC, then steps the current down to 24V DC for operating the lamp. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring: This explosion proof LED flood lighting system is equipped with 200` of 12/3 chemical and abrasion resistant SOOW cord leading up to the encapsulated step down transformer, and 10` of 16/3 SOOW cable on the input side of the transformer that is fitted with an industrial grade cord cap for easy connection to common wall outlets.Please note: the transformer on this unit is waterproof rated but is NOT explosion proof rated. The transformer must remain outside the hazardous environment. Plug: Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.Please note: the cord cap on this unit is outdoor rated but is NOT explosion proof rated. Electrical connections must be made outside the hazardous environment. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is needed. The LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. 7 Watt 735 Lumen LED Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Blue and Gray paint finish.6. UL Class1 Div1 Class 2 Div17. 12V/24V DC Volt Operation8. SOOW cable.9. Aluminum Hook for Convenient Placement. 7 watt LED light produces 735 lumensNon-sparking aluminum housing50,000 hour LED LampMolded rubber bumper guardAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operationExplosion proof cord Specifications / Additional Information EHL-LED-120XLV-200 U.L. Ratings UL Listing: United States & Canada Class 1, Division 1 & 2 for Groups C, D Lamp Type:: LED Class II, Division 1 and 2 for Groups F, G Dimensions: L-16.5 " Dia-5" Conforms to UL 781 Lumens: 735 Certified to CSA STD C22.2 No. 12 and CSA STD C22.2 No 137 Total Watts: 7 watts Voltage: 120-277V AC, Inline Step-Down Transformer, 24V DC Output Color Temp: 6000k Special Orders- Requirements Mounting: Aluminum Hook Contact us for special requirements Wiring: 200` 12/3 SOOW, inline transformer, 10` 16/3 SOOW Industrial Cord Cap Toll Free: 888-325-4448 Cord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase- Same Day Shipping on This Light!