Larson Electronics Explosion Proof LED Drop Light & Reel - Class I, Div. I - 10 Watt LED - 30' SOOW Cord - 1050 Lumen

Made in the USAThe Larson Electronics EHL-LED-7W-30-HR Explosion Proof LED Drop Light / Trouble Light with cord reel is Class 1 Division 1 & 2 Groups C and D approved, and is ideal for general work activities in hazardous locations requiring explosion proof protection.***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** This 10 watt explosion proof LED work light from Larson Electronics produces 1050 lumens of bright white light and comes complete with an explosion proof cord reel with spark proof ratchet mechanism. The EHL-LED-7W-30-HR fluorescent drop light has no ballast and the housing is constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. The non sparking reel contains this unit’s 30` of SOOW Cord for convenient cord management. This explosion proof reel and LED hand lamp can be installed and used within the hazardous location area, making it ideal for hazardous work areas where a ready source of easily managed lighting is desired. 100 Watt Incandescent Bulb With the EXP-LED-7W-100Click Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 1050 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes complete with 30’ of SOOW 16/3 AWG. The Class 1, Division 1 rated reel contains 30’ of SOOW 16/3 AWG cord, a spark free ratchet, explosion proof slip-ring housing and meets federal specification JC-580A. This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn`t need to drag the ballast housing around. This can be particularly annoying when the ballast becomes entangled in the cord. This explosion proof LED hand light operates on standard 120-277 Volts AC 50/60 Hz, 11V AC, or 25V AC for low voltage applications. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is needed. The LED lamp in this unit runs much cooler than incandescent or fluorescent lamps, resulting in a lamp housing that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights.Stringer Energy Consumption ComparisonIncandescentCFLLEDWattage100 watts26 watts10 wattsAmp Draw @ 120V AC0.84 amps0.22 amps0.08 ampsAmp Draw @ 277V AC0.36 amps0.10 amps0.04 amps Amp Draw @ 12V AC8.34 amps2.17 amps0.83 amps Amp Draw @ 24V AC4.17 amps1.09 amps0.42 ampsLamp Life Expectancy1,500 hours8,000 hours 50,000 hoursColor Temperature2800K4300K6000KOperation cost per year(8hs/day @ 11c/kWh)$32.12$8.35$3.21Made in USA QualityLamp & Reel Features1. Federal Spec Cord.2. Explosion Proof.3. 10 Watt 1050 Lumen LED Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Blue and Gray paint finish.6. Class1 Div1 Class 2 Div1 7. 120-277 Volt AC, 11V AC or 25V AC Operation8. SOOW cable.9. Aluminum Hook for Convenient Placement.10. Explosion Proof Cord Reel11. Spring activated reel ratchet12. 4-roller adjustable cable guide10 watt LED light produces 1050 lumensNon-sparking aluminum housing50,000 hour LED LampMolded rubber bumper guardAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operationExplosion proof cordBuilt to UL 508 table 36.1 / NEC Standards Indoor or outdoor use Gray epoxy finish on steel parts Specifications / Additional Information EHL-LED-7W-30-HR UL/CUL RatingsListing: United States Class 1, Divisions 1 & 2, Groups C, D Lamp Type: LEDClass 2, Divisions 1 & 2, Groups, F, G Handlamp Dimensions: 16.5"-L x 5"-DiaClass 1, Zone 1, Group IIBHandlamp Weight: 5.5 lbsNEMA 4X Voltage: 120-277V AC, 11V AC, 25V AC Total Watts: 10 watts Total Lumens: 1050 Luminous Efficacy: 105 Lm/WLamp Life: 50,000+ HoursColor Temp: 6000KColor Rendering Index: >75Lighting Configuration: 360¡ FloodSpecial Orders- RequirementsPower Efficiency: 90%Contact us for special requirements Power Factor: >0.95Toll Free: 888-325-4448Mounting: Aluminum HookIntl: 1-903-270-1187Wiring: 30` SOOW Cord on Explosion Proof ReelE-mail: [email protected] CAN RENT THIS UNIT. CONTACT 888-325-4448. Scroll Down to Purchase-