Larson Electronics Explosion Proof LED Drop Light - C1D1 - 25m Cord - 120-277V Stepped Down to 24V - Inline Transformer

Made in the USAThe Larson Electronics EPL-FL1524-LED-X24-25M Hazardous Area LED Work light is F.M. approved Class I Division 1 & 2. With a 2 foot long 15 watt LED tube lamp, this hazardous location light provides higher quality light than higher wattage incandescent lights and more light than previous fluorescent lamp equipped models. This light is suitable for exposure to vapors and dusts and ideal for use in paint spray booth inspections or as general portable lighting in confined spaces like fuel tanks or grain storage areas. This 2 foot long, 15 watt, explosion proof LED work light from Larson Electronics comes complete with a 25 meter (82`) long explosion proof cord for long range and convenient operation. This hazardous location area light features a rugged, non-sparking aluminum casing and unique rod cage and produces cool, glare-free, shadowless light that improves safety in hazardous locations and maximizes lighting efficiency with built-in metal reflectors. These LED lights improve on the desirable qualities of similar fluorescent models with higher output and better light quality and are ideal for paint booth applications, storage container inspections and applications involving confined spaces such as tank cleaning and industrial container maintenance.The high light output, good light color and evenness of coverage makes these lights ideal for a wide variety of close quarter work and inspection activities. These lamps are multi-voltage capable and can operate with voltages of 120 VAC to 277 VAC @50/60Hz. The EPL-FL1524-LED-X24-25M has an inline transformer that steps down the input voltage to 24V. This power converter features an IP67 rated waterproof design, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage.40` Container Dark Click Photos to Enlarge Container With EPL-FL1524-LED Click Photos to Enlarge The 15-watt LED lamp used in this unit provides as much illumination as higher-wattage incandescent lamps without the associated heat, reducing the chances of accidents or burns. This lamp has no ballast, which reduces lamp weight, an impact resistant tube shield with specially designed annealed glass and an aluminum hook for easy overhead mounting. The 25 meter (82`) long Class I Division 1 rated SOOW 16/3 AWG cord and explosion proof slip-ring housing help this unit to achieve approval for use in environments containing flammable vapors and combustible dusts. This explosion proof fluorescent hand lamp can be used within hazardous locations rated Class I Division 1 and 2, and Class II Division 1 and 2, making it ideal for hazardous work areas where a ready source of easily managed lighting is desired.LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These drop lights can operate on current ranging from 120 to 277V AC without any modifications necessary as a result. We also offer a low voltage 11-25V AC/DC version for low voltage applications. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V RatedL5-15 Twist Lock Plug15 Amp / 125V RatedL6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail WiresWiring and Plug: This explosion proof proof LED drop light is equipped with 25 meters (82`) of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Lamp Features2 foot 15 watt LED Tube Lamp 50,000 hour service life Non-sparking aluminum housingNo Ballast Molded rubber bumper guardsAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damage to bulbsSwivel hook for hanging and hands free operationExplosion proof cord Specifications / Additional Information EPL-FL1524-LED-X24-25M Work LightRatings/ApprovalsListing: United StatesClass I Division 1 & 2 for Group D Dimensions: 27"-L x 3.25"-DiaClass II, Division 1 Groups E, F, G Weight: 14.5 lbsClass III, Division 1 & 2Voltage: 120-277 Volts 50/60 Hz or 11-25 Volts AC/DCTotal Watts: 15 wattsLumens: 1450Luminous Efficacy :96.67 lm/wLamp Life: 50,000+ HoursLamp Color: 5,600KCRI: >75 White Power Efficiency: >95% Power Factor: 0.992 Lamp Lengths: 2 FootAmperage: 0.13 amps @ 120V, 0.07 amps @ 240V, 0.05 amps @ 277V Material: Rubber / Copper Free AluminumMounting: Handheld / Aluminum HookSpecial Orders- RequirementsWiring: 25 Meters (82`) 16/3 AWG SOOW cord - Inline Stepdown Transformer Contact us for special requirementsCord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or PigtailToll Free: 888-325-4448F.M. Approval: U.S CertificateIntl: 1-903-270-1187Warranty: Yes - 3 YearsE-mail: [email protected] Scroll Down to Purchase-