Larson Electronics Explosion Proof High Bay Fluorescent Light Fixture w/ Emergency Backup - 40,000 Lumens - C1D1

Made in the USAThe Larson Electronics EPL-EMG-48-432 Explosion Proof High Bay Fluorescent Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable petrochemical vapor or combustible dust exists or has the potential to exist. The unit has a T6 temperature rating and is approved for paint spray booths. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***Click here to see the LED version of this lamp.The EPL-48-432 is our 4 foot long, 8 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with eight T5HO fluorescent lamps. This fixture is multi-voltage capable with 347 Volt and 480 Volt versions available upon request. The EPL-48-432 provides operators in hazardous locations with a powerful and affordable lighting solution that provides the best explosion proof protection available without sacrificing fixture durability.Click Here to EnlargeClick Here to EnlargeClick Here to EnlargeThis fluorescent light works, mounts and is wired like our EPL-48-432 explosion proof fluorescent light fixtures. The main difference is that we attach an extra Bodine ballast box to the unit that adds emergency light functionality to the fixture. This explosion proof emergency light will run the standard 90 minutes after power is lost. The light automatically recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run one lamp for 90 minutes at 900 lumens. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.Mounting options: Standard surface mounting via our L-brackets attached to Unistruts. Pendant mounting is available for greater distancing of the fixture from the mounting surface (upon request). The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion proof light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.Made in USA QualityLamp Options1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices.3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Larger ballast box accommodates High Output lamp ballasts. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt.5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF .98 (Suffix –50KT5)F54-T5/841/HO - 50 watt, 4450 lumens per bulb, 20,000 hour life, 4100 Kelvin color, CRI 85 (Suffix -41KT5)Specifications / Additional Information EPL-EMG-48-432 Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Div 1 & 2, Groups C & DLamp Type: Fluorescent Class 1 Div 2, Group A,B,C,DDimensions: W-24.90" L-57.76" H-9.70" NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Weight: 140 Lbs NRTL Certified to UL 844, UL 924Voltage:Multi- 120V-60hz 220V-50hz& 240V-60hz 277V-60hz: 347 Volts and 480 Volts available upon request. NRTL Certified to UL 1598 Marine TypeTotal Watts:432 watts Class 2 Division 1- 2, Groups E,F,GTotal Lumens: STD-T5-HO Bulbs 40,000 Certified Canadian StandardsLuminous Efficacy: STD-T5-HO Bulbs 92 Lm/W Listed for Paint Spray BoothsColor Temp:5000K OR 4100K T5-HO Bulbs California Title 24 CompliantBeam Angle: N/A Switch Leg for Powering Light On/OffLamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours Ambient Operating Temp Range:-20¡C to +55¡C Operating Temp Rating: T6 Rated Minimum Operating Temp: -20¡ C Maximum Case Temp: 90¡C Mounting: Unistruts - surface mount Wiring Hub: 1/2 inch threaded Special Orders- RequirementsContact us for special requirements*Temperatures above 65 degrees C will diminish ballast life from 5 years to 3 years)Toll Free: 888-325-4448Intl: 1-903-270-1187E-mail: [email protected]