Larson Electronics Explosion Proof Hand Lamp -100/60 Watt - 120V AC - 25 Foot SOOW Cord w/ Explosion Proof Plug - C1D1

Made in the USA The Larson Electronics EPL-120-25-1523 Explosion Proof Hand Lamp is UL Listed Class 1 Division 1 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. This explosion proof work light from Larson Electronics comes complete with 25 feet of explosion proof cord. The EPL-120-25-1523 drop light housing is constructed of aluminum with a rubber bumper guard designed to provide an effective lighting solution for operators requiring a versatile source of illumination. This hazardous location hand lamp is Class 1, Division 1 approved when equipped with a 100 watt bulb and Class 2 Division 1 approved when equipped with a 60 watt bulb. This explosion proof drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. These particular units also come standard with an explosion proof twist-lock plug. The plug is Class I, Division I & II and Class II, Division I & II rated. In order to complete the seal, operator must take twist-lock explosion proof plug and connect to an explosion proof outlet receptacle. Connecting to a regular 120VAC outlet renders the plug useless and should only be done when connecting the light outside of the explosion proof environment. Dark 40` Container Illuminated with EPL-120-100 Click Photos to Enlarge Click Photos to Enlarge This 60 or 100 watt drop light is suitable for use in areas where petrochemical vapors (100 watt) and various dusts (60 watt) are present. This unit is rated Class 1, Division 1, Class 2 Division 1 and comes complete with 25’ of SOOW 16/3 AWG cord ending in a straight blade plug. This explosion proof hand light operates on standard 120 Volts. This unit is available with either a 100 watt bulb for Class 1 Division 1 operation (Gases Vapors) or a 60 watt bulb for Class 2 division 1 operations (Dusts). Choose your bulb type below when ordering. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. 60 or 100 Watt Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Red and Gray paint finish.6. UL Class1 Div1 Class 2 Div17. 120 Volt Operation8. 25` SOOW cable.9. Hook for Convenient Placement.10. Explosion Proof Plug -Class I, Div. I & II-Class II, Div. I & II Rubber bumper GuardNon-sparking aluminum housing120 VAC operation Aluminum lamp guardLamp shield prevent shatteringPlugs into standard outlets Swivel hook for hanging and hands free operationExplosion proof cordExplosion Proof Twist-Lock Plug Specifications / Additional Information EPL-120-25-1523 Explosion Proof Handlamp NTRL Listings UL Listing: United States Class 1, Division 1 Groups C, D (100 watt) Dimensions: L-16.5 " Dia-5" Class 2, Division 1 Groups F, G (60 watt) Total Watts: 100 or 60 watts Conforms to UL standard 781 Voltage: Stnd-120VAC CSA C22.2 No. 12 and CSAC22.2 No. 137 Mounting: Hook Wiring: 25` SOOW Cord With 1523 Explosion Proof Plug Lamp Type:: Incandescent Special Orders- Requirements Ambient Temp:: 40 degrees C maximum Contact us for special requirements Operating Temp:: 160 degrees C (T3C) Class 1 & 2 Toll Free: 888-325-4448 YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. Click here to view the Explosion Proof Light Design Description E-mail: [email protected] Down to Purchase- Same Day Shipping on This Light!