Larson Electronics Explosion Proof Fluorescent/UV Lights for Paint Booths, Oil Rigs and Boats - 2' Long - 2 Lamps

Made in the USAThe EPL-24-2L-T8-VISUVA from Larson Electronics is an Explosion Proof Combo Fluorescent / UV Light Fixture that is NRTL Listed for Untited States and Canada Class I Division 1 and Class II Division 1 and for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.The EPL-24-2L-T8-VISUVA fixture is a 2 foot long, 2 lamp, Class I Division 1 and Class I Divisions 1 & 2 explosion proof combo fluorescent / UV light and an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with one T8 fluorescent lamp and one UV-A lamp. The UV-A lamp produces light in the wavelength range between the 400nm - 315nm spectrum. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and for use in paint spray booths.The EPL-24-2L-T8-VISUVA provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.Wiring: Two separate wire connections are provided so operators can power on just the white lamp or just the UV lamp. This allows operators to change from an inspection or curing application (UV) to standard inspection or viewing (white light).Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light.Additional Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information EPL-24-2L-T8-VISUVA Explosion Proof RatingsNRTL Listed for United States & Canada Class 1 Division 1, Groups C and DDimensions: 11.25"W x 27.5"L x 8.5"H Class I Division 2, Group A,B,C,DWeight: 55 lb Class II Divisions 1-2, Groups E,F,GTotal Watts: 48 Watts* NRTL Certified to UL 844, 924Voltage: Multi- 120 V-60 Hz, 220 V-50 Hz, 240 V-60 Hz, 277 V-60 Hz NRTL Certified to UL 1598 Marine TypeTotal Lumens: T8 Bulb 1190 NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)Wavelength: UV-A Bulb 400 Nm - 315 Nm Listed for Paint Spray BoothsLamp Life Expectancy: T8 Bulbs 20,000 Hours California Title 24 CompliantEfficiency: T8 Bulb 66 Lm/W *Wattage totals are lamps only and may vary with different lamps.Ambient Operating Temp Range:- 30¡C to 70¡C Beam Angle: N/A Color Temp: T8 Bulb 4100K Mounting: Bracket Standard - Pendant Optional Special Orders- RequirementsWiring Hub: 1/2" NPT Threaded Hub Contact us for special requirementsOperating Temp Rating: T6 Rated Phone: 1-214-616-6180Minimum Operating Temp: -30¡C Toll Free: 888-325-4448Maximum Case Temp: 90¡C Intl: 1-214-616-6180? E-mail: [email protected]