Larson Electronics Explosion Proof Fixture/Extension Cord Plug - 15 Amp Rated - 250V

Larson Electronics EPP-15A-250V Explosion Proof Plug The EPP-15A explosion proof plug is rated at 15 amps and along with our with our EPP-20A series plug is compatible with our EPO-20A explosion proof 20 amp outlet. This plug can be used in both regular 250V outlets and T style outlets although in order to retain explosion proof safety, it must be mated to an explosion proof outlet. This plug is designed to lock into compatible twist lock receptacles by twisting the plug body until an audible click is heard, which indicates the plug is securely connected. Once locked into place this plug will not accidentally pull out. This plug is watertight and ideal for applications where moisture and corrosion is a problem and well suited for use in marine and manufacturing environments. This plug is rated Class 1, Division 1 and 2 and Class 2, Division 1 and 2 and is suitable for use in areas where pertrochemical vapors may be present. This explosion proof plug features non sparking aluminum construction, a longer housing for easy handling, specially designed brass pins for secure full length pin contact, and a 15 amp current rating. Inter-Compatibility: These plugs will fit non-explosion proof standard receptacles (NEMA 6-15R, or 6-20R). These plugs are are cross-interchangeable with Crouse Hind™ ENP general purpose plugs and will work with Crouse Hind™ ENR Dead Front Receptacles. Any equipment requiring these C-H plugs should work with the EPP-15A-250V plugs. Due to possible manufacturer changes we cannot gaurantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Motor-Generator Sets, Compressors, Wet areas or Locations Where Petrochemical Vapors are Present. Specifications / Additional Information EPP-15A-250V Explosion Proof PLug Certifications - Compliance Amp Rating: 15 Class 1, Div 1 & 2 Groups B,C,D Dimensions: 2.78"-L 1.75"-W Class 2 Div 1 & 2 Group G & Coal Dust Configuration: 3 Pole 2 Wire Class III Suitable Cable Diameter: .538” to .639” CSA Type 7BCD, 9G Voltage: 250V Seals: Neoprene Plug Wire Bushing Compatability: EPO-20A Receptacle- Crouse Hind™ ENR Receptacles Special Orders- Requirements Cross Interchangeability: Crouse Hind™ ENP General Purpose Plugs Contact us for special requirements Protection: Twist Lock Activation on Commpatible Twist Lock Receptacles Toll Free: 888-325-4448 Fax: 1-903-498-3364 E-mail: [email protected]