Larson Electronics Explosion Proof Dual Transformer - 6 kVA & 500 VA - 600V Pri. - 120V Sec. - C1D1&2/C2D1&2 Enclosure

The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 from Larson Electronics is an Explosion Proof Dual Transformer that features both a three phase 6 kVA transformer and 0.5 kVA (500 VA) single phase transformer contained within a single explosion proof enclosure. The 3 Phase Energy Efficient transformers are powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, the EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. The transformer of the EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 is mounted in an explosion proof enclosure that is rated for Class I and II Divisions 1 & 2 hazardous locations. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer 1 Features: With a transformer rating of 6 kVA, the first transformer in the EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 is a three phase unit with a primary voltage of 600 V Delta. It also provides a secondary voltage of 120 V. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be floor mounted. The unit also features 220¡C insulation with a 150¡C temperature rise and is rated IP24. Benefits: The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 isolation transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This isolation transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Integrated floor brackets make installation fast and easy and the offset outward facing floor installation holes allow for easy power tool access. Safety: The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 is an isolation transformer which means that it provides operators with an increased level of protection against electric shock. An isolation transformer can also suppress electrical noise in sensitive devices and transfer power between two circuits which must not be connected. The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 achieves these safety features by separating or "isolating" the powered device from the power source and insulation between the primary and secondary power sources. Transformer 2 Features: With a transformer rating of 0.5 kVA (500 VA), the second transformer in the EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 isolation transformer is a single phase unit with a primary voltage of 600 V. It also provides a secondary voltage of 120 V. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be floor mounted. The unit also features 220¡C insulation with a 150¡C temperature rise and is rated IP24. Benefits: The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 isolation transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This isolation transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Integrated floor brackets make installation fast and easy and the offset outward facing floor installation holes allow for easy power tool access. Safety: The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 is an isolation transformer which means that it provides operators with an increased level of protection against electric shock. An isolation transformer can also suppress electrical noise in sensitive devices and transfer power between two circuits which must not be connected. The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 achieves these safety features by separating or "isolating" the powered device from the power source and insulation between the primary and secondary power sources. Enclosure: The explosion proof enclosure on the EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 provides operators with a Class I and II, Divisions 1 and 2 transformer. This explosion proof enclosure is made of cast aluminum, is equipped with stainless steel hinge and bolts, includes a watertight gasket for a NEMA 4X protection rating and is ideal for indoor or outdoor applications where flammable vapors, gases, or dusts exist or stand the potential to exist. The enclosure features one 3/4" NPT hub on the west side and one 3/4" NPT hub on the east side which enable operators to bring power in and out. Wiring: The EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 is equipped with internally mounted terminal strips that allow operators to make electrical connections to each transformer on both the primary and secondary sides. Applications: Power supplies for Class I and II Divisions 1 & 2 hazardous locations. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information EPL-TX-600D-6KVA-0.5KVA-120V-2X0.75 Transformers w/ Explosion Proof Enclosure Ratings/Approvals Transformer 1 Phase: Three Phase Listed for United States and Canada Frequency: 60 Hz Class I, Divisions 1 & 2 kVA: 6 Class II, Divisions 1 & 2 Primary Voltage: 600 V Delta 220¡C Insulation System Primary Configuration: Delta NEMA 3R, 7, 9 Secondary Voltage: 120 V Winding Material: Aluminum Insulation: 220¡C Primary Termination: - Secondary Termination: - Sound Level: Meets NEMA ST-20 Standards Transformer 2 Phase: Single Phase Frequency: 60 Hz kVA: 0.5 (500 VA) Primary Voltage: 600 V Taps: TBD Secondary Voltage: 120 V Winding Material: Aluminum Insulation: 220¡C Temperature Rise: 150¡C Impedance (Std): - Seismic: Yes Sound Level: Meets NEMA ST-20 Standards Primary Termination: - Secondary Termination: - Overall Dimensions: 29.25"L x 41.25"W x 14.0"H Special Orders- Requirements Enclosure Material: Cast Aluminum Contact us for special requirements Hubs: (1) 3/4" NPT Hub on West Side, (1) 3/4" NPT Hub on East Side Toll Free: 888-325-4448 Wiring: Terminal Strips Intl: 1-214-616-6180 Total Weight: 500 lb E-mail: [email protected] Down to Purchase-