Larson Electronics Explosion Proof Drop Light (Hand Lamp) with Inline Transformer - 50ft - 120 volts input to 12 volt

Made in the USA The Larson Electronics EPL-120X12-50 Explosion Proof Drop Light / Hand Lamp is UL Listed Class 1 Division 1 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. 12 Volt Incandescent bulbs are being phased out. Click here to see the low voltage LED version of this explosion proof hand lamp. This explosion proof work light from Larson Electronics comes complete with 50 feet of black explosion proof cord leading to an inline transformer that steps down 120-277VAC to 12 Volts for powering the lamp, with an additional 10 feet of cable out of the transformer to the plug. The EPL-120X12-50 drop light housing is designed to provide an effective low voltage lighting solution for operators requiring a versatile source of illumination. This hazardous location hand lamp is Class 1, Division 1 approved when equipped with a 100 watt bulb and Class 2 Division 1 approved when equipped with a 75 watt bulb. This explosion proof drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. Dark 40` Container Illuminated with EPL-120X12-100 Click Photos to Enlarge Click Photos to Enlarge This 75 or 100 watt drop light is suitable for use in areas where petrochemical vapors (100 watt) and various dusts (75 watt) are present. This unit is rated Class I, Division 1, Class II Division 1 and comes complete with 50’ of SOOW 16/3 AWG cord ending in a straight blade plug. This explosion proof hand light operates on standard 120 Volts AC Hz and steps this voltage down to 12 Volts via an included inline transformer. This transformer plugs into standard wall outlets and is encased in a watertight boot. The bulb in this drop light is operates on 12 Volts and designed specifically for low voltage operation. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. 75 or 100 Watt Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Red and Gray paint finish.6. UL Class I Div 1 & Class II Div 17. 120-277 Volt dropped to 12 Volt Operation8. SOOW cable.9. Hook for Convenient Placement. Watertight Inline TransformerNon-sparking aluminum housingLow Voltage Aluminum lamp guardLamp shield prevent shatteringPlugs into standard outlets Swivel hook for hanging and hands free operationExplosion proof cord Specifications / Additional Information EPL-120X12-50 U.L./ CSA Ratings UL Listing: United States Class 1, Division 1 Groups C, D (100 watt) Dimensions: L-16.5 " Dia-5" Class 2, Division 1 Groups F, G (75 watt) Ambient temperature : Ambient temp 40C maximum Conforms to UL standard 781 Total Watts: 100 or 75 watts CSA C22.2 No. 12 and CSA C22.2 No. 137 Voltage: Stnd-120-277VVAC stepped down to 12 Volts Operating Temp: 160 degrees C (T3C) Class 1 & 2 Mounting: Hook Wiring: 60` (50+10) SOOW Cord; Inline 120 - 12VAC Transformer Lamp Type: Incandescent Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. Click here to view the Explosion Proof Light Design Description E-mail: [email protected] Scroll Down to Purchase- Same Day Shipping on This Light!