Larson Electronics Explosion Proof Battery Backup System for EXP-EMG Series Bug Eyes - 480V 1PH - 100 Watts

The EXP-EMGBALL-LED2-100W-480V.1P from Larson Electronics is an Explosion Proof Emergency Battery Backup System that works with LED lighting systems to create an emergency lighting system. This battery backup system is encased in a Class I Division 1 cast aluminum enclosure that is also IP67 rated waterproof and can be used in both indoor and outdoor applications. The EXP-EMGBALL-LED2-100W-480V.1P is compatible with the Larson Electronics EXP-EMG series of one lamp, two lamp and three lamp mason jar exit lights and bug eye signs. The EXP-EMGBALL-LED2-100W-480V.1P operates a maximum load of 20 W at unity power factor. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in a Class I Division 1 explosion proof cast aluminum case that is also IP67 waterproof and can be used in both indoor and outdoor applications. The EXP-EMGBALL-LED2-100W-480V.1P supports emergency illumination for a minimum of 90 minutes. At a maximum of 20 W at unity power factor, the EXP-EMGBALL-LED2-100W-480V.1P will provide input power to ballasted lamp supporting it at 100% of the AC rated output throughout the 90-minute emergency illumination period. Upon failure of normal power, the ballast instantly begins providing emergency power to the connected lighting load for a minimum of 90 minutes. A solid-state low voltage disconnect circuit protects the inverter battery from severe damage by deep discharge during prolonged power failures. When normal power is restored, the EXP-EMGBALL-LED2-100W-480V.1P automatically returns to charge mode. The battery capacity is fully restored in 24 hours. The ballast does not affect normal fixture operation and may be used with a switched or unswitched fixture. It can be installed in close proximity to the fixture or remote from the fixture (up to 250 feet). Compatible Lights: The EXP-EMGBALL-LED2-100W-480V.1P is compatible with the Larson Electronics` EXP-EMG series of one lamp, two lamp and three lamp LED mason jar exit lights and bug eye signs including the EXP-EMG-12W-1L, EXP-EMG-12W-2L or the EXP-EMG-EXT-12W-3L. The EXP-EMGBALL-LED2-100W-480V.1P can replace broken, damaged or otherwise compromised battery backup systems on these units. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Made in the USA Quality 1. No Maintenance Nickel-Cadmium Battery.2. Copper Free Aluminum Alloy Construction.3. 480V 1PH Operation 4. 90 Minute Battery Backup Runtime.5. Deep Discharge Battery Protection.6. 1/2” NPT Conduit Hub.7. Epoxy Powder Coat Finish.8. 10 Year Rated Lifespan.9. Fully Automatic Operation.10. Solid State Internal Electronics.11. Pilot Light AC Current Indicator.12. Test Switch for Emergency Operation Confirmation.13. Fully Electronic Circuit Control. Specifications / Additional Information EXP-EMGBALL-LED2-100W-480V.1P Explosion Proof Emergency Battery Backup Unit Approvals/Ratings Type: Emergency Battery Backup System Class I, Divisions 1 & 2, Groups C & D Dimensions: 16.38"W x 22.38"W x 11.06"H Class II, Divisions 1 & 2, Groups E,F,G Weight: 175lbs Class III Seal Offs: Customer Provided IP67 Waterproof Rating Materials: Copper Free Aluminum Housing UL 844 Mounting: Wall Mount/Flat Surface Mount UL 924 Wiring: 1/2" NPT Threaded for Conduit T3C Temperature Rating U.L. Listing: U.S. Explosion Proof NFPA101 (Life Safety Code) Battery Backup: High temp Nickel-Cadmium Battery Input Voltage: (Dual) 480V 1PH @ 60Hz Unit Life Expectancy: 10 years Battery Backup Runtime: 90 Minutes Battery Output Voltage: 480V Special Orders- Requirements Battery Output Current: - Contact us for special requirements Battery Output Power: 100 Watts (Max) Toll Free: 888-325-4448 Battery Operating Temp: 0¡C - +50¡C Battery Recharge Time: 24 hours from full discharge E-mail: [email protected]