Larson Electronics Explosion Proof 32' 12/3 SOOW Extension Cord - 15 Amp Continuous Service

Made in the USA The Larson Electronics EPEXC-32-12.3-15A Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 32 feet of 12/3 SOOW explosion proof cord rated at 15 amps of continuous service. The cord is chemical and abrasion resistant and comes with a 20 amp explosion proof receptacle installed on one end and a 15 amp explosion proof plug installed on the other end. We also include an extra matching plug for operators to attach to their equipment which allows them to avoid any issues with plug and receptacle equipment compatibility with this cord. The explosion proof receptacles on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Click Photos to Enlarge 5-15P Explosion Proof Straight Blade Plug 125V 5-15/20 Explosion Proof Outlet Outlet accepts 5-15P and 5-20P Explosion Proof Plugs Inter-Compatibility: The plugs on these cords will work with non-explosion proof standard receptacles (NEMA 5-15R, 5-20R, or 6-20R) and standard wall outlets, however, they must be used with explosion proof rated outlets to retain their explosion proof rating. The included plugs and receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5151 plugs and receptacles and Hubble-Killiark part# UGP-15231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-32-12.3-15A Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating:15 Amp Continuous Service Class 1 Div 1 Groups C and D Dimensions: Cord length-32 Feet Plug-2.78"-L 1.75"-W Class 2 Div 1 Groups F and G Configuration: 2 Pole 3 Wire Suitable Plug Cable Diameter: .538” to .639” Wiring: 32` 12/3 SOOW Cable Terminated w/ (1) 5-15P Explosion Proof Straight Blade Plug and (1) 20 Amp Receptacle Voltage: 125 Volts Receptacle Specs: 1 In-line Receptacle Configuration: 2 Pole 3 Wire Materials: Copper Free Aluminum Dimensions: 3"-W X 5.69"-D X 6.13"-H Special Orders- Requirements Mating Plugs: ****EPP-15A, EPP-20-A**** Contact us for special requirements Finish:Epoxy Powder Coat Toll Free: 888-325-4448 Intl: 1-903-498-3263 U.L. Certification E-mail: [email protected]