Larson Electronics Explosion Proof 30' Extension Cord w/ 60 Amp Continuous Service - 3-Pole 4-Wire - 480V - 4/4 SOOW

Larson Electronics 480 Volt, 3-Pole 4-Wire, 60 Amp Continuous Service, 4/3 30` Explosion Proof Extension Cord Rated is rated Class 1 Division 1 Groups C & D and Class 2 Division 1 Groups E, F, & G for use within hazardous locations. The Larson Electronics EPEXC-30-4.4-60A-3P4W Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. This Class 1 Division 1 extension cord is constructed of 30 feet of 4/4 SOOW explosion proof cord and rated for 60 amps of continuous service. The SOOW cable is chemical and abrasion resistant and comes with an explosion proof, 480V, pin and sleeve, 60 amp receptacle installed on one end and an explosion proof 60 amp plug installed on the other end. The 3-pole, 4-wire, pin-and-sleeve explosion proof plug on this extension cord cord can only be used in pin and sleeve style receptacles and will not work in standard electrical outlets. The plugs on these units are of a sliding lock design. In order for a secure and working connection to take place, the operator must first slide the plug into the explosion proof receptacle to the first stop, slide the locking mechanism to the right, then fully insert the plug until it locks into place. This ensures a safe seal is made and that the plug cannot be accidentally pulled free from the receptacle. To ensure the highest safety, operators should make connections outside of the hazardous area. The receptacle contacts are deep recessed to avoid accidental contact and contain brass contacts designed to exert constant pressure to ensure a secure connection. Ordinary location plugs will NOT activate this cord`s explosion proof receptacle. EPEXC-30-4.4-60A-3P4W Plug EPEXC-30-4.4-60A-3P4W Receptacle Inter-Compatibility: These cords use Pin and Sleeve plugs and are cross-interchangeable with Crouse Hind™ Arktight series plugs and receptacles Hubble-Killiark VSQ Series plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangeability although we have made every effort to ensure cross compatibility correctness. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-30-4.4-60A-3P4W Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 60 amp Continuous Service Class I, Div. 1 & 2, Groups B, C, D Max Voltage: 250V DC / 600V AC Class II Div 1 Groups E, F and G Dimensions: Cord length-30 Feet Plug-8.44"-L 3.06"-W Class IIII Configuration: 3-Pole, 4-Wire NEMA 3, 4, 4X, 7 (B, C, D), 9 (F, G) Cable: 4/4 SOOW 1P Horsepower: 10HP @ 240V. 15HP @ 480V, 20HP @ 600V 3P Horsepower: 10HP @ 240V. 25HP @ 480V, 30HP @ 600V Receptacle Specs: Configuration: 3-Pole, 4-Wire Materials: Copper Free Aluminum/Malleable Iron Mating Plugs: Special Orders- Requirements Grounding: Shell and Extra Pole Contact us for special requirements Seals: Factory Sealed- No External Seals Needed Toll Free: 888-325-4448 Finish: Epoxy Powder Coat Fax: 1-903-498-3364 U.L. Certification E-mail: [email protected]