Larson Electronics Explosion Proof 3 Outlet Extension Cord - 480V with 90A Continual Service - 10' 4/4 Type-W Cord

Made in the USAThe Larson Electronics EPEXC-3X-30A-10-4.4W-150A Explosion Proof Extension Cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. This 480V extension cord with 90-amp continual service comes with three, 4-pole 3-wire pin/sleeve explosion proof receptacles and 10` of 4/4 Type-W cable.The EPEXC-3X-30A-10-4.4W-150A is constructed of 10 feet of 4/4 Type-W explosion proof cord and is rated at 90 amps of continuous service. A 150-amp, 3-pole 4-wire explosion proof pin/sleeve cord cap can be found at the end of the cable. The 480V cord is chemical and abrasion resistant and comes with three inline, 30 amp, explosion proof receptacles. This unit enables multiple connections from a single cord. The extension cord comes with the following explosion proof ratings: Class I, Division 1 Groups C and D; and Class I, Zones 1 & 2, llB, llA.The receptacle contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R, or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord`s explosion proof receptacle.The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area.Suggested Applications: Manufacturing, industrial, warehouse, lighting, explosion proof light fixtures, grinders, wet areas or locations where combustible dust is present.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Specifications / Additional Information EPEXC-3X-30A-10-4.4W-150A Explosion Proof Extension CordPlug / Outlet CertificationsAmp Rating: 90 Amp Continuous ServiceClass I, Div 1 Groups C and D Dimensions: Cord-10 Feet Class I, Zones 1 & 2, llB, llAConfiguration: 3 Pole 4 WireNEMA 7Suitable Plug Cable Diameter: .875" to 1.906" Wet Location ApprovedWiring: 10` 4/4 Type-W Cord w/ (1) 150A Explosion Proof Pin/Sleeve Cord Cap and (3) 30 Amp Receptacles Factory Sealed ReceptaclesVoltage: 480 Volts Receptacle Specs: 3 Inline ReceptaclesConfiguration: 4 Pole 3 Wire Pin/SleeveMaterials: Iron Alloy Construction Amp Rating: 30AHP Rating: 3HPSpecial Orders- RequirementsDimensions: 5.75" x 7.75" x 3"Contact us for special requirements Toll Free: 888-325-4448Intl: 1-903-270-1187U.L. CertificationE-mail: [email protected]