Larson Electronics Explosion Proof 25' Extension Cord - Double Gang - 20 Amp Continuous Service - General Area Use Plug

Made in the USA The Larson Electronics EPEXC-25-2X20A-12.3-GAP Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords within the boundaries of the hazardous work area. These units are constructed of 25 feet of 12/3 SOOW explosion proof cord rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof receptacle installed on one end and a general area use industrial cord cap installed on the other end. We also include an extra matching plug for operators to attach to their equipment which allows them to avoid any issues with plug and receptacle equipment compatibility with this cord. The two 20 amp power receptacles are constructed of non sparking aluminum and finished with an epoxy powder coating while the housing is constructed of triple coated malleable iron for durability and added corrosion resistance. The internal receptacle plug contacts are constructed of brass and designed to maintain constant pressure along their entire length for superior connectivity. The plug receptacle is deeply recessed to prevent accidental contacts and designed for twist lock plug insertion to provide secure connections. A neoprene seal fitted inside the connector receptacle seals against the plug when inserted to provide positive sealing against water ingress. A spring loaded receptacle door provides an automatic weather-tight seal when the plug is removed. In standard installations within the hazardous location area, threaded rigid pipe is brought to the outlet and the outlet is affixes to a mounting surface. The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area. Inter-Compatibility: The included explosion proof plug and receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5151 plugs and receptacles and Hubble-Killiark part# UGP-15231 ACCEPTOR¨ plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness. Click Photos to Enlarge L5-20 Twist Lock Plug20 Amp / 125V Rated L6-20 Twist Lock Plug20 Amp / 250V Rated Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Wiring and Plug: This explosion proof extension cord is equipped with 25 foot of 12/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-20 20 amp straight blade plug for 110V wall outlets with ground, standard 6-20 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-20 20 amp twist lock plug for 125V twist lock outlets, NEMA L6-20 20 amp twist lock plug for 240V twist lock outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Please note: Electrical connections must be made OUTSIDE the hazardous environment. The cord caps on this extension cord are NOT class rated. Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present. Specifications / Additional Information EPEXC-25-2X20A-12.3-GAP Explosion Proof Extension Cord Plug / Outlet Certifications Amp Rating: 20 amp Continuous Service Class 1 Div 1 Groups C and D Cord Length: 25 Feet Class 2 Div 1 Groups F and G Configuration: 2 Pole 3 Wire General Area Industrial Cord Cap Receptacle Specs: Included Mating C1D1 20A EXP Plug Configuration:2 Pole 3 Wire Voltage:125V or 250V Materials: Copper Free Aluminum Mating Plugs: ****EPP-15A, EPP-20-A**** Special Orders- Requirements Finish:Epoxy Powder Coat Contact us for special requirements Gen App Cord Cap: 5-20, 6-20, L5-20, L6-20, Schuko* Toll Free: 888-325-4448 U.L. Certification Fax: 1-903-498-3364 E-mail: [email protected] *Schuko Cord cap lowers continual service rating to 16 amps from 20 amps