Larson Electronics Explosion Proof 10 Watt LED Drop Light - Class I Div I - Inline Stepdown Transformer - 50' Cord

Made in the USA The Larson Electronics EHL-LED-7W-120XLV-C1D1-50-1523 Explosion Proof LED Drop Light/Trouble Light is UL Listed Class 1 Division 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection. This 10 watt explosion proof LED work light from Larson Electronics produces 735 lumens of bright white light and comes complete with 50 feet of explosion proof cord, an explosion proof inline transformer and an ECP 1523 explosion proof plug. The EHL-LED-7W-120XLV-C1D1-50-1523 LED drop light has no ballast and the housing is constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. This explosion proof LED drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired. This LED drop light is designed with a 12 volt or 24 volt LED bulb to operate with 12VAC or 24VAC current for low voltage operation. 100 Watt Incandescent Bulb With the EHL-LED-7W This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 735 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes complete with 50’ of SOOW 16/3 AWG cord with an inline transformer ending in an ECP 1523 explosion proof plug. The EHL-LED-120XLV series requires the stepdown transformer to be outside of the hazardous location, but with by incorporating a class 1 division 1 stepdown transformer and explosion proof plug, this entire unit is explosion proof and is able to be used within the hazardous location. This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn`t need to drag the ballast housing around. This can be particularly annoying when the ballast becomes entangled in the cord. This explosion proof LED hand light operates on 12 Volts AC or 24 Volts AC for low voltage operations. An included C1D1 inline transformer allows this unit to plug into a standard outlet and operate from 120-277 Volts AC 50/60 Hz, then steps the current down to 12V or 24V AC for operating the lamp. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is needed. The LED lamp in this unit runs much cooler than incandescent or fluorescent lamps, resulting in a lamp housing that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights. Made in USA Quality Lamp Features 1. Federal Spec Cord.2. Explosion Proof.3. 10 Watt 1050 Lumen LED Lamp.4. Rugged fabricated steel and cast aluminum construction.5. Blue and Gray paint finish.6. UL Class1 Div1 Class 2 Div17. 120-277 Volt Operation8. SOOW cable.9. Aluminum Hook for Convenient Placement. 10 watt LED light produces 1050 lumensNon-sparking aluminum housing50,000 hour LED LampMolded rubber bumper guardAnnealed glass tube shields prevent shatteringIntegrated lamp shock absorbers prevent drop damageSwivel hook for hanging and hands free operationExplosion proof cord Specifications / Additional Information EHL-LED-7W-120XLV-C1D1-50-1523 U.L. Ratings UL Listing: United States Class 1, Division 1 & 2 for Groups C, D Dimensions: L-16.5 " Dia-5" Class II, Division 1 and 2 for Groups F, G Lumens: 1050 Class I Division I Inline Transformer Total Watts: 10 watts Voltage: 120-277VAC stepped down to 12V, or 24VAC with a C1D1 inline transformer Color Temp: 6000k Mounting: Aluminum Hook Wiring: 50` SOOW Cord Lamp Type: LED Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 YOU CAN RENT THIS UNIT. CONTACT 888-325-4448. E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase- Same Day Shipping on This Light!