Larson Electronics Class I Division 2 Power Distribution - 25KVA with Six 20-amp Explosion Proof Receptacles

Made in Texas The Larson Electronics EP-MGL-480-25K-120.240-6X120.20A hazardous location power distribution system is designed for operators to power their single phase 120 volt tools and equipment within Class I Division 2 rated areas. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION SYSTEMS OR SUBSTATIONS* This system is mounted on a square aluminum tube dolly cart with wheels, providing the portability required to position the unit near a 480V power source. Operators can use a 10-foot Type W line-in cable to connect to grid or generator power. The line-in cable is terminated in a Class 1 Division 2 60-amp disconnect. The disconnect protects a 25KVA Class 1 Division 2 480-120/240 transformer. The transformer feeds a Class 1 Division 2 100-amp MCB secondary panel, containing six 20-amp breakers. The breakers protect six Class 1 Division 1 20-amp, 120V 5-15R/5-20R receptacles. This power distribution system is designed for indoor and outdoor use in hazardous location areas for shipyard, plant maintenance and construction applications. Larson Electronics is a manufacturer of power distribution systems and can custom build power distribution systems to your requirements. If this unit does not meet your needs please contact 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information EP-MGL-480-25K-120.240-6X120.20A Explosion Proof Power Distribution Ratings Line In: 480V via 10” Type W cable Made in the USA Primary Disconnect: 480V 60A C1D2 Class I Division 2 Transformer: 25KVA 480-120/240 C1D2 Conforms to UL 1640 Secondary Panel: 100A MCB C1D2 6-circuit Secondary Breakers: (6) 20A 120V Secondary Receptacles: (6) 120V 20A C1D1 Form Factor: Powder coated, aluminum tubing dolly cart with run-flat wheels Special Orders- Requirements Dimensions: 40”W X 40”D X 48”H Contact us for special requirements Weight: 725 pounds Toll Free: 888-325-4448 Max Primary OCP: 52A @ 480V Max Secondary OCP: 100A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase