Larson Electronics Class 1, Division 2 Groups A,B,C,D Chemical Resistant LED Light - 10 Watts - Non-Metallic

Made in the USAThe HAL-CRNM-LED7W Class 1, Division 2 Chemical Resistant LED Light from Larson Electronics is UL rated Class 1 Division 2 Groups A, B, C, D and produces 1050 total lumens. This waterproof LED equipped light is pendant, ceiling, or wall mounted, and available in 120-277V AC, 12V DC or 24V DC voltage configurations.The powerful and durable HAL-CRNM-LED7W explosion proof LED light from Larson Electronics is ideal for industrial applications, hazardous work spaces, and areas where gases and vapors may be present and a powerful and durable general purpose light solution is needed. The lamp housing is waterproof, constructed of corrosion and chemical resistant GE Lexan polycarbonate with Pyrex globe, USCG accepted, and NEMA 4X compliant and suitable for hose-down areas. This LED lamp has a 50,000 hour operational life and is available in 120-277V AC, 12V or 24V configurations for high or low voltage operation.This hazardous area LED light carries a T2D temperature rating and has a -29C to 65C (-29F to 149F) operating temp range. This LED light carries UL 1570/1571 and UL 595 compliance and is waterproof and suitable for spray down areas and marine locations. Wiring is through 3/4" NPT hubs. This LED light carries UL and CSA certification, USCG acceptance, UL 1570/1571 approval for wet locations in any orientation, UL595 approval for marine environments, and NEMA 4X compliance for hose down areas.The LED lamp in this unit offers exceptional power, a 50,000+ hour life span, and is protected by a Pyrex globe and polycarboate globe guard. The LED lamp in this area light offers 1050 lumen light output. Light output with this explosion proof LED light is 20% brighter than a 100W incandescent bulb when measured with an Extech light meter at 10 feet. The unit shown is ceiling mount, and we offer pendant and wall mount versions as well for added installation versatility. The HAL-CRNM-LED7W is designed for resistance to the damaging and corrosive effects of chemicals with polycarbonate construction instead of metal and is ideal for locations where these hazardous compounds are commonly encountered.Voltages: 120-277V AC 50/60Hz, 12V DC or 24V DCDraws 0.4A average @ 12VDC 120VAC draws 0.04A average.Wiring is through 3/4" NPT hubs.Temp Code: Class 1 T2D 215¡C¡ C (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information HAL-CRNM-LED7W U.L RatingsLamp Type: 10 Watt LED Class 1,Division 2 Groups A, B, C, DLamp Dimensions: 5.94" OD , 9.60" Height (Ceiling Mount) UL 595: Marine Outside TypeLamp Weight:N/A UL 844: Class1 Division 2 Hazardous LocationVoltage:120-277V 50/60Hz AC, 12V DC or 24V DC UL Listed to CSA 22.2-137LED Lamp Watts: 10 Watts (7W for VDC) NEMA 4XLumens: 1050 (735 VDC) -29C to 65C (-29F to 149F) Op TempLighting Configuration:Steady Burn USCG AcceptedLamp Life: 50,000+ Hours CSA Approved New York City Department of Buildings approved Material meetsStrobe Count: N/A UL 94-V-0 standards for flame retardancyTemp Rating: T2D ETL ListingsMounting: Ceiling, Wall, Pendant CSA Standard for LuminairesWiring: 3/4 inch Hub UL 1598AHub: 3/4" NPT UL for Safety Supplement Requirements for Luminaires for Installation on Marine Vessels Special Orders- Requirements Contact us for special requirements Toll Free: 888-325-4448 Fax: 1-903-498-3364E-mail: [email protected]