Larson Electronics C1D2 Power Distribution - 25KVA - 480V to 120/240V 1PH - (10) 120V Receptacles

Made in Texas The Larson Electronics EP-MPD-480.1P-25KVA-10X120.20-2W3P hazardous location power distribution system is designed for operators to power their single-phase 120V equipment within Class I Divisions 1 & 2 rated areas. This unit provides operators the ability to safely tap into 480VAC and distribute 120/240VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION SYSTEMS OR SUBSTATIONS* The portable power distribution system gives operators the ability to power their 120 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power via 20` of #8-3C/4W Type 3 SOOW cord terminated in a APJ6385 Male Handle Plug. On the secondary side, operators connect to ten EFS150-2023, 20-amp, 120V explosion proof receptacles for 120V equipment. For increased reliability during operation, line-in power as well as connections between the disconnect and transformer and between the transformer and secondary panel consist of heavy-duty SOOW cords. Operation: A 20` #8-3C/4W Type W SOOW line-in cord brings 480 V single-phase power to the 480V 3PH 60A non-fused (C1D1) disconnect and passes the current to the 25kVA explosion proof transformer. Liquid-tite flexible cord connects the primary panel to the transformer. The Class I Division 2 25kVA transformer converts 480V single-phase power to 120/240V single phase and passes the current to the secondary panel. Liquid-tite flexible cord connects the transformer to the secondary panel. The secondary side of the transformer feeds a 100-amp rated 120/240V single-phase main lug panel. This secondary panel contains ten 125V 1P 20A GFCI breakers protecting ten EFS150-2023 explosion proof receptacles. The receptacles are mounted to an aluminum back plate for easy connection for equipment in the field. All receptacles are equipped with weatherproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly are mounted on a non-sparking aluminum mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" square non-sparking aluminum tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, non-sparking locking casters, and four top located lifting eyelets at every corner which allow easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel or hot dip galvanized steel depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is designed for indoor and outdoor use in hazardous location areas for shipyard, plant maintenance and construction applications. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this unit does not meet your needs please contact 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information EP-MPD-480.1P-25KVA-10X120.20-2W3P Explosion Proof Power Distribution Ratings/Approvals Line In: 20` #8-3C/4W Type W SOOW Cord Made in the USA Line-in Cord Cap: APJ6385 Male Handle Plug Class I Divisions 1 & 2 Primary Voltage: 480V 1PH Conforms to UL 1640 Primary Panel: - Conforms to UL 1203 Primary Breakers: - Primary Receptacles: - Primary Disconnect: 480V 3PH 60A non-fused (C1D1) Primary Protection: Disconnect Transformer: 25kVA 60Hz 480V to 120/240V 1PH C1D2 Secondary Voltage: 120/240V 1PH Secondary Panel: 120/240V 1PH 100A MCB N3R (C1D1) Secondary Breakers: (10) 125V 1P 20A GFCI Secondary Receptacles: (10) EFS150-2023 Receptacles Secondary Protection: Weatherproof Covers Form Factor: MPD-Alum.-Cube w/ Casters & Backplate Frame Materials: Powder coated aluminum frame Special Orders- Requirements Dimensions: 38"L x 30"W x 56"H Contact us for special requirements Weight: 850 lb Toll Free: 888-325-4448 Max Primary OCP: 60A @ 480V Intl: 1-214-616-6180 Max Secondary OCP: 100A @ 240V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase