Larson Electronics 77' Hydraulic Megatower™ - 33' Gooseneck Trailer - Galvanized Steel Mast - No Lights

Made in the USA The LM-HLM65-TLR from Larson Electronics is a Trailer Mounted Hydraulic Megatower™ for heavy-duty industrial applications. This trailer-mounted fold over 7-stage hydraulic tower provides a safe and effective way for operators to quickly deploy customer-provided lights or equipment to elevations above 65` (ground to mast head), reaching a total height of 77` (with 11` of mast head assembly). This trailer-mounted tower features a choice of 120/240V or 120/208V single-phase or 240V/120 or 208V/120 three-phase power distribution panel with customer-provided connection. This hydraulic light tower folds over for easy transportation, features a hydraulic ram upright assist and hydraulic mast. The entire assembly is mounted onto a 33` dual tandem axle gooseneck trailer, allowing operators to transport this fold over boom from location to location. The LM-HLM65-TLR has been designed to hold steady through extreme conditions and can be easily transported through any kind of rough terrain. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* The LM-HLM65-TLR is a versatile trailer-mounted tower that is capable of securing lights and equipment in elevated positions. This unit is equipped with a choice of 120/240V or 120/208V and single or three-phase power distribution panel with a customer-provided connection. The hydraulic telescoping mast can be extended to heights above 65`. The hydraulic tower is capable of reaching heights up to 77` with the mast head assembly, which measures 11` in height. They heavy-duty nature of this Megatower makes it ideal for mining-grade applications, as well as large scale event illumination, construction, industrial operations, and anywhere a rugged mobile full power lighting system capable of extended operation is needed. A 90" wide by 132" tall and 2" by 2" by 1/4" thick steel mast head is attached to the upper section of the mast which provides a strong and stable platform for customer-provided lights or equipment, which can be mounted to the head of the tower. The boom can be collapsed to 30` for applications where a footprint smaller is required. The tower is constructed of carbon steel tubing with 2` foot of overlap per section. The mast is elevated using an included hydraulic ram and extended to its full height using a second hydraulic system. Click Images to Enlarge Telescoping Boom: The hydraulic telescoping boom is constructed of carbon steel with a galvanized finish and extends to 65` in height from the ground to the mast head and 77` of total height with the tower assembly (measures 11` in height). This boom is raised from and lowered to the folded position by a single hydraulic ram and extended or retracted by a second hydraulic system. Wiring/Controls: Each bank is wired into the NEMA 3R breaker control box at the base of the mast. Operators control customer-provided light heads or equipment via an on/off switched breaker per bank of five light heads. The hydraulics are also powered from within this breaker box. The mast elevation is controlled by a push button switch to operate the hydraulic ram allowing operators to raise the mast to the upright position. The vertical deployment is operated by a second push button switch allowing operators to extend it to its full 77` height or retract it to the collapsed height. Specifications / Additional Information LM-HLM65-TLR Trailer Mounted Megatower™ Quick Summary Trailer Specs Cold Weather Package Factory Installed Materials: Steel 33` to 77` Mast Trailer Dimensions: 33`-L, 8`-W Hydraulic Aluminum Mast Height (Mast Collapsed): 33`-H Steel Construction Trailer Height (Mast Extended): 77`-H Hydraulic Mast Operation Footprint (Outriggers Extended): 36` x 19`-11" Powered Boom Deployment Hitch: Gooseneck (12" I-beam Construction) All Equipment Mounted on a 33` Trailer Wiring: 7-Pin Flat 10,000 lbs Leveling Jacks Axles: (2) 10,000 lbs Dual Tandem 6-Point Outrigger System Suspension: Tandem Dually Switched Breaker System for Equipment Outriggers: (6) 6` x 12" x 12" I-Beams Retractable w/ (6) 7,000 lbs Manual Leveling Jacks Steel Trailer w/ Industrial Grade Paint Finish Wheels: (8) 16" 5x4.5" Steel Rims Towable Height Under 13` w/ Mast Head Tires: (8) P235/80R16 Light Tower Specs Tower Length: 30` to 77` Materials: Carbon Steel Finish: Galvanized Operation: Hydraulic System Specs Voltage: 120/240V 1P, 120/208V 1P, 240V/120 3P, or 208V/120 3P Special Orders- Requirements Amperage: 105A Max @ 120V, 60A Max @ 208V, 52.5A Max @ 240V Contact us for special requirements Wiring: Customer Provided Phone: 1-214-616-6180 Shipping: Common Freight Toll Free: 888-325-4448 Shipping Dimensions: 33`L x 9`W x 8.5`H Fax: 1-903-498-3364 Shipping Weight: - E-mail: [email protected]