Larson Electronics 75 KVA Transformer Power Distribution - 480V 3P to 208Y/120 - 400A MLO Pri - 200A MB Sec Panel

Made in Texas The Larson Electronics MGS-480V.3P-400MLO.125A-75K-208Y.120-200A heavy duty 3-phase power distribution substation gives operators the ability to tap in three 480V into the primary panel. On the secondary side, operators can tap 120V and 208V devices. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* This portable power distribution system provides a safe and reliable way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant maintenance, equipment installations and repairs. Operation: The operator provided line-in cord brings 480V three phase power to the 400-amp, 480V, 3-phase, 30-circuit MLO panel, which contains one 125-amp breaker protecting the 75 KVA transformer. The NEMA 3R transformer converts 480V three phase power to 208Y/120V and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 200-amp, 30-circuit main breaker panel. All interior breakers are provided via the customer. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge The above are examples of a completed unit, with line-in, breakers and receptacles installed. Please note: line-in cord, breakers, and receptacles are NOT included with this unit Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Applications:This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~~Please check all motor loads for dual rated motors that will work 208 or 240. ~~ Specifications / Additional Information MGS-3X480.100A-150K-3X208.60A-12X120 Power Distribution System Ratings Line In: Customer Provided UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480 V AC 3P NEMA 3R Indoor or Outdoor Use Primary Panel: 480V 3P 400A MLO panel w/ (1) 125A breaker (TXF) Made in the USA Transformer: 75KVA 480-120/208Y 3P N3R Secondary Voltage: 120VAC/208Y Secondary Panel: 200A 3P MCB NEMA 3R Panel Transportation: Skid pockets, locking casters, and top pick eye Special Orders- Requirements Form Factor: 34”-L X 40”-W X 58”-H Contact us for special requirements Weight: ~650 lbs Toll Free: 888-325-4448 Max Primary OCP: 112 amps @ 480V Intl: 1-903-270-1187 Max Secondary OCP: 200 amps @ 208V E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase