Larson Electronics 72W Emergency Fluorescent Light - 4' 2 Lamp - Battery Backup - ATEX/IECEx - Steel Pole Mount

The ATEX-HALP-EMG-48-2L-T8-2X36W Hazardous Area Fluorescent Light Fixture with Stainless Steel Pole Mount from Larson Electronics is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This emergency light fixture is specifically designed to handle the rigors of wet and corrosive marine environments, and comes equipped with an added battery backup providing 3 hours of emergency runtime. The ATEX-HALP-EMG-48-2L-T8-2X36W hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This ATEX/IECEx rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant polycarbonate lens. Corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is ATEX/IECEx approved for Zones 1 and 2, and 21 and 22. The ATEX-HALP-EMG-48-2L-T8-2X36W-SSPM also carries a T4 temperature rating. This fluorescent light works, mounts and is wired like our ATEX-HALP-24-2L explosion proof fluorescent light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will run the standard UL suggested 3 hours after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 900 lumens for 3 hours. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. Mount: This pole mount fixture is equipped with two stainless steel bar clamps to allow operators to secure the light fixture to existing poles. This two-piece clamp provides easy installation. Suggested Applications: The ATEX-HALP-EMG-48-2L-T8-2X36W is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information ATEX-HALP-EMG-48-2L-T8-2X36W Hazardous Area Approvals/Ratings Listing: United Kingdom, Europe and Asia ATEX/IECEx Zones 1 & 2 and 21 & 22 Lamp Type: Fluorescent ATEX Ex II 2 G Ex d e mb IIC T4 Gb Dimensions: 67.4"L x 4.12"W x 3.5"H ATEX Ex II 2 D Ex tb IIIC T80¡C Weight: 15 Lbs IECEx Ex d e mb IIC T4 Gb Voltage: 120-277V AC 50/60 Hz IECEx Ex IIIC T80¡C Db Low Voltage (Optional): 12-24V DC IP66, IP67 Total Watts: 72W (36W Per Lamp) watts Wet Area Suitable Total Lumens: 5616 Total Lumens (2,808 Per Lamp) Luminous Efficacy: 78 Lm/W Lamp Life Expectancy: 24,000 Hours Color Temp: 4100K Beam Angle: 150¡ Ambient Operating Temp Range: -30¡C to +50¡C Operating Temp Range: T4 Rated Mounting: Stainless Steel Pole Mount Special Orders- Requirements Housing Material: Polyester and Glass Fiber Housing Contact us for special requirements Gasket Material: Silicone Toll Free: 1-800-369-6671 Lens Material: Polycarbonate Lens Intl: 1-214-616-6180 Wiring Hub: (2) 1/2", 3/4", M20 or M25 Threaded NPT Hubs on Either Sides E-mail:[email protected]