Larson Electronics 70W Explosion Proof Dock Light - 120/277V to Low Voltage DC - Inline C1D1 Transformer - 26" Arm

Made in the USAThe EPL-DL-70LED-24-XLV-C1D1-EPP Explosion Proof Dock Light is UL Listed Class I & II, Divisions 1 & 2 and is rated for use in wet and marine environments. The 26" extended swing arm made of 1.5" square steel tube and metal halide lamp used with this unit provides operators with excellent power and efficiency coupled with high versatility and ease of use. The EPL-DL-70LED-24-XLV-C1D1-EPP is equipped with a C1D1 explosion proof enclosure for the inline transformer and comes outfitted with an explosion proof cord cap.*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*The EPL-DL-70LED-24-XLV-C1D1-EPP explosion proof dock light provides 6,020 lumens of light output. The 70 watt LED lamp assembly in this unit produces higher quality illumination with better color rendering and contrasting than typical 400 watt halogen lamps while drawing only 70 watts at 5.84 amps on 12 Volts DC, or 0.59 amps on 120 Volts AC. The LED lamp runs cooler than 400 watt halogen lamps, resulting in an easier and safer to handle unit and less heat in the workspace. The LED lamp in this unit produces a brilliant flood pattern of light that is ideal for high vibration environments and general illumination in any area designated a hazardous location fitting this units` classification. A 26" extended swing arm made of 1.5" square steel tube provides adjustable mounting for a 70 watt light head and allows users to position the light as needed during loading and unloading operations. Dark field without any illumination Illuminated with the EPL-DL-70LED-24-XLV-C1D1-EPP This explosion proof light fixture is comprised of a 70 watt LED light head mounted atop a 26" extended swing arm made of 1.5" square steel tube with powder coat yellow finish for durability. The swing arm allows a total of 180 degrees horizontal adjustment while the hinge bracket connecting the light to the arm provides both vertical and horizontal adjustment for a wide range of possible positions. Included with this unit is 6` of wire to be used to connect this unit in compliance with NEC methods for Class I, Div. I locations. The wire entrance is sealed and a 1/2 inch threaded NPT allows operators to make conduit connections at the base of the lamp head.The lamp assembly includes a 70 watt LED lamp and aluminum finish reflector in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.Durability: This unit incorporates a 70 watt LED lamp assembly containing seven CREE XLamp MC-E¨ ten watt LEDs producing 860 lumens each, and a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp assembly has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Click Photos to Enlarge 5-15 Straight Blade Plug 5-20 Straight Blade Plug 6-20 Straight Blade Plug Wiring & Plug: This explosion proof dock light is equipped with 100 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets, a 5-20 20 amp straight blade plug for use with 120V explosion proof outlets, or a 6-20 20 amp straight blade plug for use with 220-240V explosion proof outlets. **PLEASE NOTE** voltage ratings on plugs and outlets are MAXIMUM voltage. For low voltage applications, proper voltage must be applied to the outlet or damage to the light fixture will occur.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Made in the USA QualityLED Benefits1. High Efficiency and Output 70 Watt LED lamp.2. 70 Watt LED Lamp Provides Cooler Operation..3. Rugged Die Cast Aluminum Lamp Housing.4. 3/4" Shock Resistant Tempered Glass Lens.5. Copper Free Shell, Covers and Sealed Fittings.6. Vibration/Impact Resistant Construction.7. Low Maintenance.8. 50,000+ Hour Lamp Life.9. UL Listed for Marine Environments.1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration) 5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety.Specifications / Additional Information EPL-DL-70LED-24-XLV-C1D1-EPP Explosion Proof Dock LightRatings/Approvals:UL Listing: United States/Canada Class I Division 1, Groups C and DDimensions: 11.56"W x 11.5"H x 9.25"Depth Class I Division 2, Groups C and DLed Type: CREE XLamp MC-E¨ LEDClass II, Divisions 1 & 2, Groups F and GTotal Watts: 70Class IIIVoltage: 12V DC, Included 110-260V AC to 12/24V DC In-line Transformer UL 595 Marine Use Lamp Lumens: 6020LED Lamp Life Expectancy: 50,000+ HoursWeight: 25 lbsMounting: 26" Square Steel Swing ArmTransformer: DCP-11 Waterproof 12/24V DC Transformer w/ C1D1 EnclosureOperating Temp Range: T4 Rated LED Drive %: 90%Special Orders- RequirementsPWM Drivers: Active LED Heat Management & Current RegulationContact us for special requirements Wiring: 100` 16/3 SOOW Cord, In-line Transformer, Explosion Proof PlugToll Free: 1-800-369-6671Cord Cap Options: 5-15P, 5-20P, 6-20PIntl: 1-903-270-1187Warranty: YES - 3 Years*E-mail:[email protected] Scroll Down to Purchase-