Larson Electronics 60 Watt Remote Control Color Changing LED Wall Pack Light - 10' Cord - U-Bracket Mount - Wide Flood

The LEDWP-600-RGB-10C Color Changing LED Wall Pack Light with 10` cord offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt remote control RGB LED light produces a wide flood beam in a variety of colors and configurations without the high heat, fragile construction, or high energy costs of traditional lighting. The LEDWP-600-RGB-10C color changing LED wall pack light from Larson Electronics produces a colorful flood beam while drawing only 0.5 amps at 120 VAC. The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood light. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45¡ offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment. This color changing LED flood light is an RGB unit, meaning it can produce red, green and blue light of varying levels and intensity. Operators scroll through various colors by using an included handheld remote. This LED light is also dimmable, and can be set to operate in different modes including steady burn, flash, strobe, color fade, and smooth fade. Users can also turn the lamp on/off via remote control. This floodlight has internal memory and will remember the last set configuration when power is cut via light switch or unplugging the lamp. This high output LED flood light is an ideal replacement for high temperature incandescent, fluorescent, and metal halide lamps without fragile design, high energy consumption, and need for colored filters or special coatings as seen with traditional lighting. The LEDWP-600-RGB-10C consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. Each LED chip contains individual red, blue, and green diodes to produce a full spectrum of color choices. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2" waterproof connector provides a secure and sealed power connection point and rounds out this unit`s weather resistant construction. The remote control included with this multi color LED lamp is an wireless control unit with a working distance of 25 feet. This remote control capability is ideal for operators who install these LED flood lights in hard to reach or elevated locations, allowing them to change the color and operating modes of the lamp quickly and easily. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: This cart mounted LED flood lighting system is equipped with 10 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mounting hardware for the LEDWP-600-RGB-10C consists of a steel coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 hz, providing versatile power connection options. The LEDWP-600-RGB-10C provides an efficient and highly durable alternative to standard quartz and and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power. With the LEDWP-600-RGB-20C there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600-RGB-10C is ideal for landscape lighting, aesthetic lighting, wall pack lighting, down lighting, upwards lighting, event lighting, restaurants, monuments, marinas, docks, billboards, and any application requiring a high output colored LED flood light. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or messageinfo@lightingandsupplies.com for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information LEDWP-600-RGB-10C Wall Pack Light LEDWP-600-RGB-10C Features Lamp Type: RGB LED Waterproof/Vapor Proof Dimensions: W-9" D-3.25" H-6.5" Operates on Standard 110-277 VAC Watts: 60 Impact/Vibration Resistant Construction Lumens: 5400 50,000 Hour LED Life Voltage: 110-277 Volts AC 50/60hz ETL Approved for Wet Locations Lighting Configuration: Flood - Steady, strobe, flash cycle IP68 Waterproof Operation: Remote Control Color Changing LED Flood Light Mounting: Adjustable Bracket Remote Control Adjustability Wiring: 10` 16/3 SOOW Cable w/ Cord Cap Cord Cap: 5-15, 6-15, 5-20, 6-20, L5-15, L6-15, L5-20, L6-20, BS1363, Schuko, or Pigtail Amps: 0.5 Special Orders- Requirements LED Light Color: Color Changing: Red/Green/Blue Contact us for special requirements LED Life Expectancy: 50,000 hours Toll Free: 1-800-369-6671 Materials: Aluminum Housing, Polycarbonate Lens Weight: 8.3 Lbs. E-mail:info@lightingandsupplies.com 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. -Scroll Down to Purchase-