Larson Electronics 56W Vapor Proof 4' LED Light for Outdoor Use - 7000 Lm - IP67 - 125V High Voltage Direct Current

The GVP-48-2L-LED-125VDC from Larson Electronics is similar to our popular explosion proof LED fixtures and provides an LED alternative to fluorescent fixtures that provides longer lamp life and higher performance. These LED two lamp fixtures produce more output with longer lamp life and are vapor proof and impact/ vibration resistant. This vapor proof LED light is ideal for applications such as ships, offshore applications, marine (saltwater) use, manufacturing, water treatment centers, shopping malls, parking structures, and outdoor flood lighting. The GVP-48-2L-LED-125VDC operates on 125 V DC high voltage direct current. *Please note that this unit is vapor proof and not approved for use in hazardous locations.* This four foot long, two lamp LED fixture is ideal for operators seeking a top quality vapor proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The GVP-48-2L-LED-125VDC LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This fixture is equipped with two specially designed LED T8 style LED bulbs which produce 3500 lumens each and have a color temperature of 5600K or 4500K. The GVP-48-2L-LED-125VDC, four foot long, two lamp LED light fixture is designed for those who wish to replace or upgrade from fluorescent equipped fixtures and offers better light output and longer lamp life with reduced maintenance costs. With no ballast and solid state LED light tubes, this fixture draws less than 1 amp of power while offering durability and versatility that common fluorescent fixtures cannot match. We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light`s performance. This two lamp HAZLOC LED linear fixture is lighter in weight and produces more light than hazardous location fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified. Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. A four foot, two lamp T8 fluorescent light, with a combined total of 64 watts, draws 0.51 amps at 125 volts DC. This LED version of the same light, with a total of 56 watts, draws only 0.45 amps at 125 volts DC. The GVP-48-2L-LED-125VDC operates on 125 V DC high voltage direct current. Energy Consumption Comparison T5HO T8 LED Wattage 108 watts 64 watts 56 watts Amp Draw @ 125 V DC 0.86 amps 0.51 amps 0.45 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Color Temperature 5000K / 4100K 4100K 5600K Operation cost per year(12hs/day @ 12c/kWh) $56.77 $33.64 $29.43 This unit is designed to be either surface mounted or hung from cable or chain and includes built in mounts. The GVP-48-2L-LED-125VDC light fixture is ideal for indoor-outdoor applications and suitable for use as general area lighting, shop lighting, work space lighting, garage and warehouse lighting, and anywhere a rugged and dependable fixture with high output and efficiency is needed. This light comes with a multi-purpose mounting bracket that can be used for a direct surface mount or reversed and used for chain hanging the unit. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information GVP-48-2L-LED-125VDC Features Listing: United States - Canada High Output T8 Style LED Tube Lamps Dimensions: 49-3/4"L x 5-7/8"W x 4-3/16"H 50,000+ Hour LED Life Span Weight: 5 lb Reduced Energy Consumption With Improved Output Voltage: 125 V DC High Voltage Direct Current Vapor Proof Total Watts: 56 W Vibration Shock Resistant Total Lumens: 7,000 ETL Approved for Wet Locations Luminous Efficacy: 125 Lumens per Watt LED Lamp Life Expectancy: 50,000+ Hours Color Temp: 5600K, 4500K, 3000K Color Rendering Index: >80 Beam Angle: 160¡ Power Efficiency: 90% Special Orders- Requirements Power Factor: >0.95 Contact us for special requirements Ambient Operating Temp Range: -40¡C to +65¡C Toll Free:888-325-4448 Mounting: Surface or Chain Standard Intl: 1-214-616-6180 Wiring Hub: 1/2" NPT E-mail: [email protected] -Scroll Down to Purchase-