Image coming soon

Larson Electronics 56W Vapor Proof LED Fixture - 0-10V Dimmable - DALI Network - 7000 lms - IP67 - Outdoor Applications

Larson Electronics

(No reviews yet) Write a Review
SKU:
GVP-ADC-48-2L-LED-D-V2
Weight:
0.00 LBS
Call for price
The Larson Electronics GVP-ADC-48-2L-LED-D-V2 Dimmable LED Light Fixture is a connected lighting solution that is similar to our popular explosion proof LED fixtures and provides an LED alternative to fluorescent fixtures in rugged work sites. Equipped with a DALI-PWM signal converter, these two dimmable LED lamp fixtures produce more output with longer lamp life and are vapor proof and impact/vibration resistant. Controls for the dimmable LED unit is facilitated by an analog output module using Modbus TCP/IP protocol. No programming is required during setup. Please note that this unit is vapor proof and not approved for use in hazardous locations. This four foot long, two lamp 0-10V dimmable LED fixture is ideal for operators seeking a top quality vapor proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The GVP-ADC-48-2L-LED-D-V2 LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This fixture is equipped with two specially designed LED T8 style LED bulbs which produce 3500 lumens each and have a color temperature of 5600K or 4500K. The GVP-ADC-48-2L-LED-D-V2 , four foot long, two lamp LED light fixture is designed for those who wish to replace or upgrade from fluorescent equipped fixtures and offers better light output and longer lamp life with reduced maintenance costs. With no ballast and solid state LED light tubes, this fixture draws less than 1 amp of power while offering durability and versatility that common fluorescent fixtures cannot match. This LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications. We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. This two lamp HAZLOC LED linear fixture is lighter in weight and produces more light than hazardous location fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs. Aevum Network Controlled Lighting Solution: The Aevum Network Controlled Lighting Solution from Larson Electronics enables connected and intelligent illumination using cutting-edge and existing networks. Using Modbus TCP/IP or DALI (for fixtures with dimming features), businesses can seamlessly control lights and sensors from remote locations, without traditional light switches. Web-based panels facilitate real-time monitoring of connected equipment and allows operators to switch units on/off, configure activation settings and more. Businesses may utilize their own systems and software with these controllers, ensuring robust flexibility and cost savings (no contracts). The Aevum Network Controlled Lighting Solution can improve productivity in the workplace by automating basic lighting controls and making lighting controls widely accessible in the facility, via local networks or the internet. Operators also have the option to monitor the status of fixtures from a remote location, which can improve maintenance and reduce downtimes. Larson Electronics offers equipment and accessories required for a DALI network. Controls: Controls for the LED fixture is accessible using a web-based control panel. Compatible with HTTP, XML, or Modbus TCP/IP protocols, network configuration is accessible using web-based pages (no programming required). Operators can monitor or setup controls from a remote area using the internet or local IP network and any standard web browser. Protective features include: integrated 15kV protection (ESD protection), integrated over-temperature, open-line and short circuit. Output alarms can be set for open current loop and high internal temperature. LED indicator lights on the device provide the real-time information about power, fault condition for all 5 channels and network link/activity. Password protection for the setup page is available (13 characters maximum). Operators can upload scripts during setup using the web-based panel. Signal Converter: The LED lighting system is equipped with a signal converter, which converts DALI signals to PWM signals. This component features built-in push dim functionality and a comprehensive dimming range of 1-100%. A total of four output channels can be found on the DALI-PWM signal converter. Selectable output PWM logic includes active high (factory setting) or active low. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified. Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. A four foot, two lamp T8 fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts, draws only 0.47 amps at 120 volts AC. The GVP-ADC-48-2L-LED-D-V2 is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power. Network: The analog output module is equipped with five configurable channels. This unit works with 10/100 Base-T ethernet ports and allows static IP address assignment or DHCP, HTTP port selectable during setup. Compatible with 9-28V DC, the module features a 12-position, removable connector for power and outputs, as well as an accessible 8-pin RJ45 port. Operators can mount the device on walls, surfaces or din rails for space-saving benefits. Energy Consumption Comparison T5HO T8 LED Wattage 108 watts 64 watts 56 watts Amp Draw @ 120V AC 0.90 amps 0.54 amps 0.47 amps Amp Draw @ 220V AC 0.49 amps 0.29 amps 0.25 amps Amp Draw @ 240V AC 0.45 amps 0.27 amps 0.23 amps Amp Draw @ 277V AC 0.39 amps 0.24 amps 0.20 amps Amp Draw @ 12V DC 9 amps 5.34 amps 4.67 amps Amp Draw @ 24V DC 4.5 amps 2.67 amps 2.34 amps Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours Color Temperature 5000K / 4100K 4100K 5600K Operation cost per year(12hs/day @ 12c/kWh) $56.77 $33.64 $29.43 This unit is designed to be either surface mounted or hung from cable or chain and includes built in mounts. This light comes with a multi-purpose mounting bracket that can be used for a direct surface mount or reversed and used for chain hanging the unit. Suggested Applications: DALI lighting networks, remote lighting networks, warehouses, industrial buildings, general areas, manufacturing floors, wet locations, marine sites, docks, rugged locations and more. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information GVP-ADC-48-2L-LED-D-V2 LED Fixture Features Listing: United States - Canada High Output T8 Style LED Tube Lamps Dimensions: 49-3/4"L x 5-7/8"W x 4-3/16"H 50,000+ Hour LED Life Span Weight: 5 lbs Reduced Energy Consumption With Improved Output Voltage: Universal 120-277VAC 50/60 Hz or 11-25V AC/DC Vapor Proof Total Watts: 56W Vibration Shock Resistant Total Lumens: 7,000 ETL Approved for Wet Locations Luminous Efficacy: 125 Lumens per Watt 0-10V Dimmable LED Lamp Life Expectancy: 50,000+ Hours Password Protected Network Controls Color Temp: 5600K, 4500K, 3000K No Programming Required Color Rendering Index: >80 Modbus TCP/IP Connectivity Beam Angle: 160¡ DALI or Push Dim Power Efficiency: 90% PWM Output Signal Power Factor: >0.95 Ambient Operating Temp Range:-40¡ C to +65¡C Mounting: Surface or Chain Standard Wiring Hub: 1/2" NPT Signal Converter Specs Watts: 0.5W Input Voltage: 90-306V AC or 127-431V DC @ 47- 63Hz Current: 0.1A Input Signal: DALI or Push Dim Output Channels: 4 Output Signal: PWM Output Logic: Active High or Active Low Dimming Range: 1-100% Relay Switch: 240V AC, On/Off Operating Temperature: -30? to +60? Housing Material: Fully Isolated Plastic Connection: Terminals (TB1, TB2 and JP1) Analog Output Module Specs Dimensions: 1.41" x 3.88" x 3.1" Weight: 4.8 oz Network Type: 10/100 Base-T Ethernet Port (Static IP address assignment or DHCP, HTTP Port Selectable) Protocols: HTTP, XML, Modbus TCP/IP Voltage: 9-28V DC Max Current: 92mA-163mA @ 24V DC (10 Mbps Network Speed; 126mA-198mA @ 24V DC (100 Mbps Network Speed) Configurable Channels: 5 Output Ranges: 0-5V, 0-10V, ±5V, ±10V, 4-20mA (Software Selectable) Resolution: 16-bit DAC (0-65535) Current Output (Voltage Mode): 10mA Max (Min Load = 1K), 30mA Max Short Circuit Voltage Output Inaccuracy: ±0.2% FSR Includes Offset Error, Gain Error and Non-linearity Error Max Load Capacitance: 20nF (no load), 5nF (1K load) Current Output Range: 4-20mA Output Compliance Voltage: 11.50V Minimum Isolated Power Supply: Internal DC to DC Converter Isolation: Galvanic, 1500V AC ESD Protection: Integrated, 15kV Protection Output Protection: Integrated Over-temperature, Open-line and Short Circuit Protection Output Alarms: Open Current Loop, High Internal Temperature Output @ Power Up: Programmable LED Indicators: (8) Power On, Fault Condition (Channels 1-5), Network Linked, Network Activity Special Orders- Requirements Operating Temperature: -40¡C to 65.5¡C Contact us for special requirements Housing Material: Lexan 940 Polycarbonate Plastic Phone: 1-214-616-6180 Mount: Surface, Wall or DIN Rail Toll Free: 1-800-369-6671 Password Protection: Yes @ Setup (Base 64 Encoding, 13 Characters) Fax: 1-903-498-3364 Connectors: 12-position/Removable (Power/Outputs), 8-pin RJ-45 (Network) E-mail: [email protected] Down to Purchase-

Reviews