Larson Electronics 56W LED Pivoting Light - 4' - 2 Lamp - C1D2 - Offshore LED Light - Extends 16" From Mounting Surface

Made in the USAThe Larson Electronics HAL-48-2L-LED-BMSW-16INB Hazardous Area LED Light Fixture is NRTL Listed for United States and Canada Class I Division 2 Groups A, B, C and D - NRTL Certified to UL 1598A listed, has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. This hazardous location LED light carries a United States Coast Guard approval, making it ideal for applications such as oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers. A 16" wall mounted bracket allows the HAL-48-2L-LED-BMSW-16INB to be mounted on walls and other flat surfaces and extend 16" away from the mounting surface.This four foot long, two lamp LED fixture is ideal for operators seeking a top quality hazardous location light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The HAL-48-2L-LED-BMSW-16INB fixture is a 4 foot long, 2 lamp, Class I Division 2 Groups A, B, C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 28 watt LED lamps. The lamps are protected by a powder coated aluminum frame and shatter and heat resistant clear acrylic lens secured with ten zinc coated steel draw latches.We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. This two lamp HAZLOC LED linear fixture is lighter in weight and produces more light than hazardous location fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.This fixture carries a T4A temperature rating and is NRTL Certified to U.L. 595 and UL 1598A Marine Type approved for use marine environments. The fixture is constructed of copper free sheet aluminum and powder coated. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. The HAL-48-2L-LED-BMSW-16INB is weatherproof and provides operators in hazardous locations with a highly efficient, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. Click here to read the NEC description for explosion proof and hazardous locations.Click Image to EnlargeClick Image to EnlargeClick Image to EnlargeWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs.Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3360 lumens at 120 lumens per watt, for a combined 6720 total lumen light output. A HAL-48-2L-T8 hazardous location fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts, draws only 0.47 amps at 120 volts AC. The HAL-48-2L-LED-BMSW-16INB is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.Energy Consumption ComparisonT5HO T8 LEDWattage 108 watts 64 watts 56 wattsAmp Draw @ 120V AC 0.90 amps 0.54 amps 0.47 ampsAmp Draw @ 220V AC 0.49 amps 0.29 amps 0.25 ampsAmp Draw @ 240V AC 0.45 amps 0.27 amps 0.23 ampsAmp Draw @ 277V AC 0.39 amps 0.24 amps 0.20 ampsAmp Draw @ 12V DC 9 amps 5.34 amps 4.67 ampsAmp Draw @ 24V DC 4.5 amps 2.67 amps 2.34 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursColor Temperature 5000K / 4100K 4100K 5600KOperation cost per year(12hs/day @ 12c/kWh) $56.77 $33.64 $29.43Mounting: The HAL-48-2L-LED-BMSW-16INB is equipped with a wall mount bracket that can be used to mount the fixture on walls and other flat surfaces. The bracket included with the HAL-48-2L-LED-BMSW-16INB allows the fixture to extend 16" out from the chosen mounting surface. The bracket is attached to the mounting surface via a single predrilled hole on each arm of the bracket.Suggested Applications: Aircraft maintenance, oil drilling rigs, refineries, marine and salt water environments, ships, tankers, offshore, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs.Made in USA Quality Superior LED Benefits1. Each unit dialectically tested.2. Fixture arrives assembled and lamped to reduce installation time and cost. 3. Fixture constructed streamlined ribbed corrosion-resistant, copper free sheet aluminum body for better hear dissipation and extended ballast life.4. Aluminum lens frame for greater strength5. Re-lamping done via 10 draw latches, which enable the operator to unlatch the lens and access the lamps.5. Heavy gauge aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.6. 1/2" or 3/4" threaded access hole for wiring conduit.7. Units can be wired end to end in series. 1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off - No flickering, delays or buzzing.11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety.Specifications / Additional InformationHAL-48-2L-LED-BMSW-16INB Hazardous Area LED Light Ratings/Approvals:NRTL Listed for United States & Canada Class I Division 2, Groups A, B, C & DDimensions: 51.1"L x 7.09"W x 8.65"H NRTL Certified to UL 844Weight: 22.2 Lbs NRTL Certified to UL 1598A Marine TypeTotal Watts: 56 watts Listed for CanadaTotal Lumens: 6720 T4 Temperature RatingVoltage: Universal 120-277V AC 50/60Hz or 12-24V AC/DC Meets USCG SpecsLED Lamp Life Expectancy: 50,000 Hours California Title 24 CompliantLuminous Efficiency: 120 Lumens per Watt Operating Temp Range: T4A rated -40¡C to +65¡C Beam Angle: 150¡ Color Temp: 5600K or 4500K - Color Rendering Index-75 Mounting: 16" Wall Mount Bracket Special Orders- RequirementsWiring Hub: 1/2" or 3/4" threaded Contact us for special requirementsMaterials: Sheet aluminum housing, acrylic lens Toll Free: 1-800-369-6671Intl: 1-903-270-1187? E-mail:[email protected]