Larson Electronics 5300' Temporary Tunnel String Light - 530 LED Work Lamps - 277V - 10/4 SOOW Feeder Whip - Twistlock

Made in the USA The Larson Electronics WAL-SL-530-LED-12.3-2.5Kx10.4-MG-TWP-277V Temporary Tunnel LED Lighting String Light System is designed for high output illumination and daisy chain connections across a total length of 5700` away from the power source. The 10 watt LED lamps on this this work site light set provide more and higher quality light than 100 wattage incandescent lights while creating less heat and using less power. This LED light stringer operates on 277V AC and provides operators with a temporary work light solution for tunnels and underpasses up to a mile in length. This temporary tunnel string light consists of 530 industrial grade LED lamps with 10` of 12/3 SJTW cable between each unit, stretching a total of 5700` in length. This temporary LED string light is connected to a 277V power source via an integrated 4.5` cable terminated with in a NEMA L7-15P cord cap. Each globe light is equipped with a high output LED bulb which delivers more light output than a 100 watt incandescent. The 10 watt LED bulb draws 10% the electrical power of a standard 100 watt bulb, making it suitable for standard voltage and low voltage applications. Each LED light screws into a molded E26 lamp socket and the bulb is enclosed in a bird cage style metal guard. Five-hundred and thirty high output A19 style LED lamps producing 1050 lumens per lamp provide a total of 556,500 lumens of bright white illumination. Each lamp housing is constructed from light weight aluminum, and fitted with an impact and shatter resistant polycarbonate diffuser. These LED light bulbs provide additional safety measures and time savings, given the low heat production and that it does not require replacing for 50,000 hours. Since the LED bulb uses solid state technology, the vibration (dropping, etc.) that degrades conventional incandescent bulbs is not an issue with these LED bulbs. 100 Watt Incandescent Bulb 10 Watt LED Bulb Click Photos to Enlarge Click Photos to Enlarge Each light has a metal mesh guard enclosure that provides protection for the enclosed bulb and a hook eyelet that allows operators to hang these tasks lights overhead. Utilizing energy efficient LED lamps, operators are able to provide more light coverage from the same amp draw, or lower the amp draw using the same amount LED lamps as incandescent. Each LED trouble light has an effective range that approximately covers a 5-8` radius with 10-15 foot candles of light. Unlike fragile incandescent and compact fluorescent lamps that are made from glass, these LED bulbs are extremely durable and can live up to the abuse of harsh working conditions. With a lamp life of 50,000 hours, operators are not constantly having to replace burnt out or broken lamps, reducing down time and lowering the amount of spare lamps required at the job site. The backbone of this unit broken into two main section. The first section spans 2650`, with power supplied via a L7-15P cord cap. A 10/4 SOOW feeder whip with L7-15P and L7-15C cord caps provides power to the section section. The feeder whip can be tied to the first section during deployment. Each ten lamp section is daisy chained together via 4.5` whips coming off the final socket and terminated in NEMA L5-15 connectors. This aids in storage and transportation of this mile long string light. Stringer Energy Consumption Comparison Incandescent CFL LED Wattage (single unit) 100 watts 260 watts 10 watts Wattage (total) 53,000 watts 13,780 watts 5,300 watts Amp Draw @ 277V AC 191.34 amps 49.75 amps 19.14 amps Lamp Life Expectancy 1,500 hours 8,000 hours 50,000 hours Color Temperature 2800K 4300K 6000K Operation cost per day(12hs/day @ 12c/kWh) $76.32 $19.85 $7.64 Operation cost per month (12hs/day @ 12c/kWh) $2,289.60 $595.30 $228.96 Operation cost per year(12hs/day @ 12c/kWh) $27,856.80 $7,242.77 $2785.68 These LED lamps are suitable for wet areas, extremely long lived, resistant to damage from impacts and vibrations, and consume far less energy than standard lamps. This tunnel string light is configured to operate with 277 volt electrical current. The LED lamps provide more and better quality illumination than 100 watt incandescent string lights without the high heat and fragile glass construction of traditional lamps. With the low energy requirements of LED lamps, mile long assembly units are now physically possible. Previously, it would have been unrealistic to have a complete assembly reaching 5300` in length from a single point of power. Lamp Features Superior LED Benefits 1. 10 Watt LED Lamps2. 530 Lamps for a total of 5,300 watts spanning a mile in length.3. 1050 lumens per lamp for a total of 556,500 lumens.4. High output LED lamps provide bright white illumination and better color rendering compared to the dingy yellow tint of traditional incandescent lamps. 5. Outdoor approved equipment.6. No ballast, no flickering, instant on illumination7. Cage Metal Guards for added protection8. 277V AC Operation9. Durable solid state LED construction resists damage from impacts and vibrations.10. Hanging hook for hanging and hands free operation.11. 10` of 12/3 SJTW cable between each light.12. 10/4 SOOW feeder whip for second whip of string lights, allowing single point of power for the entire unit.13. 5700` span of temporary LED work lighting.14. Daisy chain operations allows connecting multiple stringers together for maximum work site illumination, while aiding in servicing, storage, and transport of the tunnel light system.15. Energy efficient alternative to incandescent and compact fluorescent temporary string lights. 1. 50,000 hour lifespan.2. Can SAVE 50% or more on energy.3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)5. 100% recyclable.6. No toxins-lead, mercury.7. No UV light, infrared radiation or CO2 emissions.8. Qualifies buildings for LEED and other sustainable business certifications.9. Bright, even light maintains consistent color over time.10. Instant on/off – No flickering, delays or buzzing. 11. Very good color rendering.12. Vibration/impact resistant.13. Significantly cooler operation.14. Less frequent outages, higher output improves workplace safety. Specifications / Additional Information WAL-SL-530-LED-12.3-2.5Kx10.4-MG-TWP-277V String Lights Features Lamp Type: LED Lower Amp Draw Lamp Quantity: 530 Wet Area Approved Lamp Watts: 10 watts High Output 10 Watt LED Lamps Total Watts: 5,300 Watts Daisy Chain Connection (End to End) Lumens: 556,500 (1050 per lamp) Spans total length of 5700` Voltage: 277V AC 556,500 Lumens of Total Illumination Total Length: 5700` Wiring: 10` 12/3 SJTW Cable Per Unit, 4.5` Whips Special Orders- Requirements Feeder Cable: 2650` 10/4 SOOW Cable Contact us for special requirements Cord Cap: L7-15P Toll Free: 888-325-4448 Stringer Quick Disconnects: L5-15P and L5-15R Mounting: Eyelet for hook mounting E-mail: [email protected] Down to Purchase-