Larson Electronics 500W High Intensity Low Bay LED Light - 60,000 Lumens - 120-277VAC - Outdoor Rated - MH Equivalent

The GAU-LB-500W-LED Low Bay LED Flood Light offers intense light output and is ideal for flood lighting, low bay lighting and industrial and outdoor lighting applications. Producing 60,000 lumens, a 4.25 amp draw at 120V, 80,000 hour service life, 120-277 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1500 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. The GAU-LB-500W-LED Low Bay LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 500 watts at 5 amps from a 120 volt electrical system. Fourty-Eight CREE¨ high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a wide flood beam designed to provide more light over a larger, ideal for use as dedicated low bay and area lights. We also offer a well focused 24¡ wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area, in addition to 10¡ spot, 38¡ narrow flood, 60¡ flood, and 90¡ wide flood beam spreads. The spot beams are tightly focused and are designed to illuminate small and tight spot areas while flood beams cover wider areas with less distance. GAU-LB-500W-LED lights are ideal replacements for fragile and hot running 1500 watt metal halide lamps. They offer low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: low bay lighting, warehouses, low bay LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial illumination, sport complexes and storage facilities. The above image shows the comparison of the traditional (4) 1500 watt metal halides light fixtures mounted at 30` (left) to (4) GAU-LB-500W-LED 500 watt LED light fixtures mounted to a height of 30` The area being illuminated by each tower is 300` in length and 250` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. Durability: As well as unparalleled heat control, the GAU-LB-500W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to +80¡ Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE¨ LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. Mounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 160¡ of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning. Specifications / Additional Information GAU-LB-500W-LED Low Bay LED Light Quick Summary Lamp Type: CREE¨ LED 1000 Watt Metal Halide Replacement Dimensions: 22.92"-L x 14.51"-W x 5.153"-D Ambient Op Temp -40¡C to +80¡C Weight: 32.35 Lbs Ideal for Low Bay Lighting & LED Retrofits Total Watts: 480 98% Transmission High Purity PMMA Optics Total Lumens: 60,000 Multiple LED Banks for Heat Dispersion Luminous Efficiency: 135 lm/w 135 Lumens Per Watt Efficiency Beam Configurations: 10¡ Spot, 24¡ Wide Spot, 38¡ Narrow Flood, 60¡ Flood, or 90¡ Wide Flood 70% Lumen Retention after 80,000 Hours LED Color Temperature: Cool White - 5500-6500K UL1012 Compliant LED Life Expectancy: 80,000 hours UL60950-1 Compliant Optics Efficiency: 98% - PMMA High Transmittance Optics CE Certified Led Drive %: 90% RoHS Compliant Voltage: 120-277V AC or 127-431V DC IP67 Rated Waterproof Amp Draw: 5A @ 120V, 2.5A @ 240V, 2.67A @ 277V Wiring: 10` Pigtail w/ Flying Leads Mounting: Flat Surface Trunnion Mount U-Bracket Materials: Die Cast Aluminum Housing, PMMA Optics Special Orders- Requirements Housing Color: Natural Aluminum Contact us for special requirements Ambient Temperature Range: -40¡C to +80¡C Toll Free: 888-325-4448 Waterproof Rating: IP67 Warranty: Yes - 3 Years E-mail: [email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-