Larson Electronics 48W Explosion Proof LED Light w/ Emergency Backup - C1D1 - (2) 4ft LED Lamps - Blackout Light

The Larson Electronics EPL-EMG-48-2L-LED-C Explosion Proof LED Light Fixture with red or blue lamps is NRTL Listed for United States and Canada approved Class I, Division 1 & 2 and Class II, Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. Equipped with a 90-minute emergency backup feature, this 4` explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.This 4' two lamp LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The 48-watt lighting system is equipped with Larson Electronics’ specially designed LEDST-5 bulbs, with two blackout red or blue LED lamp with 6 individual LED light strips in each side. Each lamp has individual leads to be powered separately. Our LED-T series bulbs are visibly brighter than standard F17/T8`s and have consistently surprised many of our customers with their unexpectedly high light output levels.These LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. This LED light, with a total of 48 watts, draws only 0.4 amps at 120 volts AC. The EPL-EMG-48-2L-LED-C is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 10-30V DC version for low voltage applications for AC or DC power.This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.LED Benefits: We have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 600-675nm wavelength red or blue for the blackout lamp.Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.Emergency Backup: This emergency backup LED light contains a battery backup unit that adds emergency light functionality to the fixture. With an integrated emergency ballast, this explosion proof LED light will continue to operate one LED lamp for 90 minutes at 1,500 lumens after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.Energy Consumption ComparisonT5HO T8 LEDWattage 48 watts 34 watts 28 wattsAmp Draw @ 120V AC 0.40 amps 0.29 amps 0.23 ampsAmp Draw @ 220V AC 0.22 amps 0.16 amps 0.13 ampsAmp Draw @ 240V AC 0.20 amps 0.14 amps 0.12 ampsAmp Draw @ 277V AC 0.18 amps 0.13 amps 0.10 ampsLamp Life Expectancy 20,000 hours 24,000 hours 50,000 hoursOperation cost per year(12hs/day @ 12c/kWh) $25.23 $14.87 $14.72Our EPL-EMG-48-2L-LED-C LED light fixture is NRTL Listed for United States and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.Surface Mount (Standard)Click Photo to EnlargeClick Photo to EnlargeClick Photo to EnlargeAdjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.Pendant Mount (Optional)Click Photo to Enlarge3 Conduit PositionsClick Photo to EnlargeSuspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.Suggested Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information EPL-EMG-48-2L-LED-C Explosion Proof RatingsNRTL Listed for United States & Canada Class I, Division 1, Groups C and DDimensions: W-11.25" x L-52" x H-8.5" Class I, Division 2, Group A,B,C,DWeight: 45 lbs Class II, Division 1&2 Groups E,F,GVoltage: Universal 120-277V AC 50/60 Hz or 10-30V DC NRTL Certified to UL 595 Marine Type (Saltwater)Total Watts: 48W (24W per Lamp) NRTL Certified to UL 844Total Lumens: 3,000 NRTL Certified to UL 1598 Marine TypeLED Lamp Life Expectancy: 50,000+ Hours Certified Canadian StandardsLuminous Efficiency: 125 Lumens per Watt Listed for Paint Spray BoothsColor: 600-675Nm (Red) or 420-440Nm (Blue) California Title 24 CompliantColor Rendering Index: >80 IP67 Rated - WaterproofBeam Angle: 150¡ T6 Temperature RatingPower Efficiency: 90% NEMA 4XPower Factor: >0.95 LEL Listed LED LampsAmp Draw: 0.4A @ 120V AC, 0.173A @ 277V AC Approved for Confined SparesAmbient Operating Temp Range:-35¡ C to +55¡C Silicone FreeOperating Temp Rating: T6 Rated Factory Sealed FixtureMinimum Operating Temp: -35¡C Emergency Battery BackupMaximum Case Temp: +90¡C Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free Lens Material: Hardened Borosilicate Glass Tubes Gasket Material: Buna Rubber O-Rings Mounting: Surface Standard - Pendant Optional Wiring Hub: 1/2" NPT Battery Backup Specs Battery AC Input Voltage: 120-277V AC 60Hz Battery AC Input Current: 90 mA Battery AC Input Power Rating: 9.5W Battery AC Output Current: 120V @ 165mA - 277V @ 72mA Special Orders- RequirementsIllumination Time: 90 Minutes Contact us for special requirementsBattery Type: High Temp, Maintenance Free, Nickel Cadmium Phone: 1-214-616-6180Battery Lifespan: 7 to 10 Years Toll Free: 1-800-369-6671Battery Charge Current: 250 mA Fax: 1-903-498-3364Battery Recharge Time: 24 Hours E-mail:[email protected]