Larson Electronics 480W High Bay LED Light - 60,000 Lumens - 1 Phase 480V - Stainless Steel Brackets - 100' SOOW Cord

The GAU-HB-400W-LED-SS-480V-100C High Bay LED Flood Light offers intense light output and is ideal for flood lighting, crane lighting, light towers, as well as industrial and outdoor lighting applications. Producing 60,000 lumens, a 1 amp draw at 480V, 80,000 hour service life, single phase 480V compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. The GAU-HB-400W-LED-SS-480V-100C comes with a 100` 16/3 SOOW power cord that is terminated in a general area cord cap. The GAU-HB-400W-LED-SS-480V-100C LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 480 watts at 1 amp from a single phase 480 volt electrical system. Forty-eight Cree¨ high output LEDs producing 1250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24¡ wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10¡ spot, 38¡ narrow flood, 60¡ flood, and 90¡ wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. GAU-HB-400W-LED-SS-480V-100C lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile stainless steel mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few. The above image shows the comparison of the traditional (16) 1000 watt metal halides light fixtures mounted to a 50` light tower (left) to (16) GAU-HB-400W-LED-SS-480V-100C 480 watt LED light fixtures mounted to a 50` light tower. The area being illuminated by each tower is 500` in length and 300` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. Durability: As well as unparalleled heat control, the GAU-HB-400W-LED-SS-480V-100C series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40¡ Celsius to +80¡ Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree¨ LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Mounting: Each unit is equipped with a back mount trunnion style mounting bracket constructed of 304 stainless steel that allows the light to be attached to flat surfaces and adjusted through 160¡ of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning. Wiring/Plug: This general use high bay LED light fixture is equipped with 100 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap. Plug options include L8-20P or L8-30P cord caps. Please make your selection below when ordering. Voltage: These lights operate on single phase 480V current. Application: These high output LED fight fixtures are idea for applications such as light towers, cranes, offshore, mining, and any application requiring high output and quality lighting. These are the same LED lights we use on our LED Mega Tower Series, including the WCDE-11-PLM50-16X400LTL-LED self contained diesel light plant and LM-50-5S-TLR-16X400LTL-LED light plant. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information GAU-HB-400W-LED-SS-480V-100C High Bay LED Light Quick Summary Lamp Type: Cree¨ LED 1000 Watt Metal Halide Replacement Dimensions: 24.8"L x 12.46"W x 3.54"D Ambient Op Temp -40¡C to +80¡C Weight: 36.38 lbs Ideal for Light Towers & LED Retrofits Total Watts: 480 98% Transmission High Purity PMMA Optics Total Lumens: 60,000 Multiple LED Banks for Heat Dispersion Luminous Efficiency: 125 Lm/W 125 Lumens Per Watt Efficiency Beam Configurations: 10¡ Spot, 24¡ Wide Spot, 38¡ Narrow Flood, 60¡ Flood, or 90¡ Wide Flood 70% Lumen Retention after 80,000 Hours LED Color Temperature: Cool White - 5500-6500K UL1012 Compliant LED Life Expectancy: 80,000 Hours UL60950-1 Compliant Optics Efficiency: 98% - PMMA High Transmittance Optics CE Certified Led Drive %: 90% RoHS Compliant Voltage: Single Phase 480V IP67 Rated Waterproof Amp Draw: 1A @ 480V Stainless Steel Mounting Bracket Wiring: 100` 16/3 SOOW Cord w/ General Area Cord Cap Cord Cap Options: L8-20P or L8-30P Mounting: Flat Surface Trunnion Mount U-Bracket - 304 Stainless Steel Materials: Die Cast Aluminum Housing, PMMA Optics Special Orders- Requirements Housing Color: Powder Coated Black Contact us for special requirements Ambient Temperature Range: -40¡C to +80¡C Toll Free: 1-800-369-6671 Waterproof Rating: IP67 Intl: 1-903-270-1187 Warranty: Yes - 3 Years E-mail:[email protected] 3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Scroll Down to Purchase-