Larson Electronics 45 KVA Power Distribution Panel - 480V to 208Y/120V 3PH - (1) L16-20R (1) L6-20R (1) 560R9W - N3R

Made in Texas The Larson Electronics MPD-1X480.20A-GFCI-45KVA-GFCI-1X208.60A-1X208.20A power distribution substation converts three phase 480V AC electrical current into three phase 208Y/120 AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use The MPD-1X480.20A-GFCI-45KVA-GFCI-1X208.60A-1X208.20A portable power distribution system gives operators the ability to power their 480 volt, 240 volt and 208Y/120 volt equipment from a single system. On the primary side, operators connect three phase 480 volt line-in power via 50` of #6 Type W cord and to one L16-20R receptacle for 480V equipment. On the secondary side, operators connect to one L6-20R receptacle for 240V equipment and to one 560R9W receptacle for 208Y/120V equipment. All receptacles are equipped with weatherproof covers and are mechanically interlocked to prevent disengagement when in use. This power distribution unit features an external earth stud at the cart. Capable of operating in atmospheres of 110¡F, the system`s removable components are equipped with securing mechanisms to prevent loss. All circuits incorporate GFCI protection. Operation: A 50` #6 Type W line-in cord brings 480V three phase power to the first NEMA 3R 30-amp three phase 480V primary disconnect, which contains three 20-amp time delay fuses protecting one 20-amp L16-20R 480V receptacle, and passes 480V three phase through to the second disconnect on the primary side. The second NEMA 3R 60-amp three phase 480V primary disconnect contains three 60-amp time delay fuses and passes three phase 480V to the transformer. The NEMA 3R 45 KVA transformer converts 480V to three phase 208Y/120V 60Hz and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 125-amp three phase 208Y/120V main lug only panel. This secondary panel contains one 20-amp 2-pole 250V GFCI breaker protecting one 20-amp L6-20R 250V receptacle and one 60-amp 3-pole 208Y/120V GFCI breaker protecting one 60-amp 560R9W 208Y/120V receptacle. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-1X480.20A-GFCI-45KVA-GFCI-1X208.60A-1X208.20A Power Transformer Ratings Line-In Cord: 50` #6 Type W Cable Max Primary OCP: 80A @ 480V Line-In Cord Cap: - Max PDU OCP: 60A @ 480V Primary Voltage: 480V AC, 3PH Max Secondary Output: 125A @ 208V Primary Disconnects: (1) 30A 480V 3PH N3R Fused @ 20A, (1) 60A 480V 3PH N3R Fused @ 60A UL 1640 Portable Power-Distribution Equipment Primary Panel: - NEMA 3R Indoor / Outdoor Use Primary Breakers: - Made in the USA Primary Receptacles: (1) 20A L16-20R [480V] Mechanically Interlocked Receptacles Primary Protection: Disconnects, Time Delay Fuses, Weatherproof Cover External Earth Stud @ Cart Transformer: 45 KVA 480V to 208Y/120V 3PH 60Hz N3R GFCI Breakers Secondary Voltage: 208Y/120V AC, 3PH Suitable for 110¡F Environments Secondary Panel: 125A 208Y/120V 3PH MLO N3R Secondary Breakers: (1) 20A 2P GFCI [250V], (1) 60A 3P GFCI [208Y/120V] Secondary Receptacles: (1) 20A L6-20R [250V], (1) 60A 560R9W [208Y/120V] Special Orders- Requirements Secondary Protection: GFCI Breakers, Weatherproof Covers Contact us for special requirements Form Factor: Square tube frame, skid pockets, top pick eye & 8” locking casters Phone: 1-214-616-6180 Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Fax: 1-903-498-3364 Weight: 600 pounds E-mail: [email protected] Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase