Larson Electronics 4-Plug Multiport AC to DC transformer - 120-277V AC to 12/24 Volts DC to 192 Watts - 25' Whips

The Larson Electronics DCP-16-4XDP-25C Waterproof Power Supply converts commonly used 100 - 277V AC electrical current to 12V DC @ 16 Amps or 24V DC @ 8 Amps. This converter includes a typical straight blade plug on the input end and four 2 prong Deutsch connectors on the output end, allowing multiple devices to be run with this unit. This converter can operate with voltages within the 100-277V AC range and converts it to 12V DC or 24V DC, allowing users to operate equipment like our LED and HID lights that require low voltage DC current from standard AC power. The DCP-16-4XDP-25C 192 watt power converter provides a safe and effective way for users to tap into and utilize common 100 to 277 Volt AC power sources and convert this current to 12 Volts DC or 24 Volts DC for use with equipment that requires 12/24 volt DC electrical power. This unit can be operated with input current ranging from 100 to 277 VAC and will output 12 Volt DC current at 16 amps or 24 Volt DC at 8 amps. This power converter features an IP67 rated waterproof design, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage. This converter comes with a straight blade plug on the input lead and a Y connector ending in four 2-pin Deutsch connectors on the output lead, allowing users to run 4 fixtures off one transformer, keeping in mind that the total amperage should ideally be kept within 75% of the unit`s total amperage output and not surpass its amperage maximum (16 amps @ 12V DC, 8 amps @ 24V DC). Most of our 12 volt LED lights and LEDLB, LEDLB-E, LEDP series lights as well as many of our HID units utilize Deutsch connectors, making this unit "plug-n-play" compatible. This converter will also work with our HML-1, CML-1, CML-2, HML-2, CML-3, HML-3 and CML-4 and HML-4 series spotlights. THIS WILL NOT WORK WITH THE HID GOLIGHT SPOTLIGHTS (GL-3XXXH-X models). If you purchase this transformer with any of our Larson Electronics lights, we will make sure that the connectors are a match. The small size and wide input voltage range of this unit make it ideal for operating Larson Electronics LED light bars, Halogen Golights and other equipment that requires 12V or 24V DC current indoors and anywhere 12 volt or 24 volt DC power is not readily available. Measuring 9.6 inches long by 2.5 inches wide by 1.5 inches deep, this unit weighs less than one pound and is mounted with two conventional screws via slots that allow removal and repositioning simply by loosening the screws. The DCP-16-4XDP-25C 192 watt converter features full range, universal AC input capability and can be operated with 100 to 277V AC. The unit converts this AC power input to 192 watt, 16 Amp 12V DC or 8 Amp 24V DC output. IP67 rated, this unit is waterproof and suitable for indoor or outdoor applications. Integrally designed protection includes overload, short circuit and over voltage safeguards to prevent overheating and unit damage in case of faults or overly heavy current draw. This unit will shut down when an over current or over voltage condition is encountered and recovers when manually turned back on. This power converter has a -30¡C to +70¡C operating temperature range and is UL UL1012 and UL60950-1 compliant as well as compliant with worldwide safety regulations for lighting. This unit has a 92% conversion efficiency and is suitable for use with moving LED signs and similar LED equipment. Click Photos to Enlarge 5-15 Straight Blade Plug15 Amp / 125V Rated L5-15 Twist Lock Plug15 Amp / 125V Rated L6-15 Twist Lock Plug15 Amp / 250V Rated UK BS1363 Straight Blade Plug13 Amp / 250V Rated / Internal Fuse Intl Schuko 2-Pin Plug16 Amp / 250V Rated / Grounded Flying Leads / Pigtail Wires Wiring and Plug: The AC line-in side of this transformer is equipped with 3` of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. The DC output side of this transformer is equipped with four leads, or "whips", for connecting to lights and equipment. Each whip is terminated in a waterproof DT06-2S 2-pin male Deutsch connector. The whips are constructed of 16/3 SOOW cable and measure 25` in length each extending from the output side of the transformer. NOTE: In order to obtain the best performance and the longest operational life from these units, it is recommended that you do not exceed 75% of the unit`s output amperage. To determine if this converter suits your desired application, add together the total wattage of the equipment you intend to use with this unit and divide this total by 12 volts to find the total amperage draw that will be placed upon the converter. For example, if you are using four of our LEDP10W-20E 20 watt LED lights, 80 watts (20 watts per light) divided by 12 volts is 6.7 amps. This would mean the DCP-16-4XDP-25C is well suited as it would run at slightly more than 50% capacity to produce the necessary 6.7 amps. Running these units at 100% of their capacity can create excess heat and lead to shortened converter life. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or [email protected] for more information about our custom options tailored to meet your specific industry needs. Specifications / Additional Information DCP-16-4XDP-25C Power Converter DCP-16-4XDP-25C Features Line In Voltage: 100-277VAC @47~63 Hz or 127-431V DC IP67 Rated Waterproof Line Out: 12V DC @ 16 Amps, 24V DC @ 8 Amps Overload,Short Circuit,Over Voltage Protection Max Watts Output: (4) 48 - 192 Total UL1012 Compliant AC Input Connector: 3` line in cable w/ Cord Cap UL60950-1 Compliant Cord Cap: 5-15, 6-15, L5-15, L6-15, BS1363, Schuko, or Pigtail International Lighting Safety Standards Compliant DC Output Connector: (4) 25` Whips, Each terminated in DT06-2S2-Pin Deutsch Connectors Output Wire Ending in 2 Deutsch Plugs Protection: Short Circuit/Overload/ Over Voltage Suitable For LED Moving Signs Mounting: Two Screw Slide Notches Special Orders- Requirements Operating Temp: -30¡C to +70¡C Contact us for special requirements Efficiency: 92% Toll Free: 888-325-4448 E-mail: [email protected]