Larson Electronics 37.5KVA Portable Power Distribution - 480V-120/240V 1PH - NEMA 3R Disconnect, Transformer and Panel

Made in Texas The Larson Electronics MPD-480-37.5-150MB-120.240 power distribution substation converts 480VAC electrical current into single phase 120/240VAC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MPD-480-37.5-150MB-120.240 portable power distribution system gives operators the ability to power their 240 volt and 120 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power via a 20` #2 SOOW cord. On the secondary side, operators provide their own outlets to power 240 volt and 120 volt equipment. Operation: A 20` #2 SOOW line-in cord brings in 480V power to the NEMA 3R 100-amp, 480V three phase primary disconnect, which contains two 80-amp time delay fuses protecting the 37.5 KVA transformer. The NEMA 3R 37.5 KVA transformer converts 480V power to 120/240V single phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 150-amp, 120/240V single phase MCB panel. This secondary panel provides space for operators to insert customer-provided outlets to power 240 volt and 120 volt equipment. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-480-37.5-150MB-120.240 Power Transformer Line-In Cord: 20` #2 SOOW Cord Primary Max OCP: 80A @ 480V Primary Voltage: 480V Secondary Max OCP: 150A @ 240V Primary Disconnect: 480V 100A Fused @ 80A N3R UL 1640 Portable Power-Distribution Equipment Primary Protection: Time Delay Fuses NEMA 3R Indoor / Outdoor Use Transformer: 37.5KVA 1PH 480V to 120/240V N3R Made in the USA Secondary Voltage: 120/240V Secondary Panel: 150A MCB 1PH 120/240V N3R Secondary Breakers: Customer Provided Secondary Receptacles: Customer Provided Secondary Protection: Customer Provided Special Orders- Requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Weight: 600 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase