Larson Electronics 30 kVA Power Distribution System - 480 1P to 120/208Y - (6) 15A & (2) 20A 120V Breakers

Made in the USA The Larson Electronics MGS-480-30k-120208-100AMB-6X120.15-2X120.20 heavy duty power transformer substation is designed for use for linear (motor) loads and converts 480 VAC three phase electrical current to 120V AC and 208Y. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power. With this model, operators can feed six 15-amp and two 20-amp devices via a secondary 120/208Y panel. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGS-480-30k-120208-100AMB-6X120.15-2X120 power distribution system provides a safe and effective way for operators to use a single 480V source and power a variety of 120/208Y devices for plant maintenance, construction and other temporary applications. This system makes 120VAC available via six 15-amp breakers and two 20-amp breakers. Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge 20 feet of number #6/4 cable brings 480V from an established breaker to a fused 30 KVA, 480-120/208Y. The transformer feeds a NEMA 3R 125-amp MLO panel with a back fed 100-amp breaker. The panel contains six 15-amp breakers and two 20-amp breakers. The NEMA 3R transformer and panel assembly is mounted to a 3/16” thick steel plate and the distribution assembly is mounted within a powder coated 2-inch square carbon steel tube (1/8-inch wall) frame with skid pockets and a top located lifting eyelet to allow easy transport. 8-inch locking casters enable the unit to be moved without the use of other equipment. Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Applications:This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Larson Electronics is a manufacturer and as such can build portable transformer systems to your specifications. Although we carry several models of power distribution transformers, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-480-30k-120208-100AMB-6X120.15-2X120.20Power Transformer Ratings Line In: 20` #6/4 SOOW cable UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480 VAC 3P NEMA 3R Indoor or Outdoor Use Transformer: 30KVA 480-120/208Y Made in the USA Secondary Voltage: 120/208Y Secondary Panel: 125A MLO with 100-amp back fed breaker 120V AC breakers: (6) 120V 15A and (2) 120V 20A Form Factor: Skid and Lifting Eyelet Equipped Steel Frame, 8-inch hard rubber casters Portability: Portability Panel: 125 amp Dimensions: 34”-L X 44”-W X 58”-H Weight: 380 pounds Features: Special Orders- Requirements Terminations: 75¡ Rated Mech Lug Contact us for special requirements 480V Supply: 14KAIC rated Toll Free: 888-325-4448 120/208Y Supply: 10KAIC rated E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase