Larson Electronics 30 KVA Power Distribution System - 25 KVA - 600V-208Y/120 - (6) 120V GFCI & (1) 208Y Receptacle

Made in Texas The Larson Electronics MGS-600V-30KVA-6X120-1X208 power distribution substation converts 600V AC three phase electrical current into three phase 208Y/120 AC. This unit provides operators the ability to safely tap into and distribute 600V AC power from a variety of sources including generators and direct grid power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and UseThe MGS-600V-30KVA-6X120-1X208 portable power distribution system gives operators the ability to power their 208 volt and 120 equipment from a single system. On the primary side, operators connect 600 volt line-in power via 25` 8/4 SOOW cord. On the secondary side, operators connect to one L14-30R 120/208V receptacle for their 120/208V 3P equipment and a six 5-20R GFCI duplex receptacles for 120V equipment. Operation: The 25` 8/4 SOOW line-in cord brings 600V three phase power to the NEMA 3R 60-amp, 480V three phase primary disconnect, which contains three 40-amp time delay fuses protecting the 30 KVA transformer. The NEMA 3R 30 KVA transformer converts 600V three phase power to 208Y/120 three phase and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 100-amp, 208Y/120 three phase main lug panel. This secondary panel contains one 30-amp, 208V breaker protecting one 30-amp, L14-30R twist-lock receptacles and six 20-amp, 120V breakers protecting six 120V, 20-amp, 5-20R duplex receptacles. All receptacles are equipped with weatherproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-600V-30KVA-6X120-1X208 Power Transformer Line-In Cord: 25` 8/4 SOOW Cord Max OCP Primary: 40A @ 480V Line-In Cord Cap: Customer Provided UL 1640 Portable Power-Distribution Equipment Primary Voltage: 600V 3-Phase NEMA 3R Indoor / Outdoor Use Primary Disconnect: 600V 60A Fused @ 40A N3R Made in the USA Primary Panel: - Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect Switch Transformer: 30KVA 600V 3-Phase to 208Y/120 3-Phase N3R Secondary Voltage: 208Y/120 3-Phase Secondary Panel: 208Y/120 100A MLO N3R Secondary Breakers: (1) 30A [208V], (6) 20A [120V] Secondary Receptacles: (1) L14-30R [120/208V], (6) 20A 5-20R [120V] Secondary Protection: GFCI (5-20R), Weatherproof Covers Special Orders- Requirements Form Factor: Square tube frame, skid pockets, top pick eye & locking 8” locking casters Contact us for special requirements Frame Materials: Powder coated steel frame Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Weight: 550 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase