Made in the USA The Larson Electronics GAUP-24-2L-LED-SS Weatherproof LED Light Fixture is specifically designed to handle the rigors of wet and corrosive marine environments. This vapor proof LED light operates on universal 120-277V AC and generates 3,500 lumens during use. The ABS approved LED fixture is ideal for applications such as oil rigs, ships, offshore and saltwater locations. This two-foot long, two-lamp LED fixture is ideal for operators seeking a top quality marine-approved light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The GAUP-24-2L-LED-SS vapor proof LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This weatherproof fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Eight corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. We now offer our second generation LED tube lamps with this fixture which have increased this vapor proof lightÕs performance. This two-lamp LED linear fixture is lighter in weight and produces more light than fluorescent fixtures. The two-foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which isÊover twice as long as standard T8 bulbs. We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the included LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. The 14-watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 1,750 lumens at 125 lumens per watt, for a combined 3,500 total lumen light output. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.
Mounting Options:ÊUnless otherwise specified, our standard, most popular configuration is the flange mount shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations. Standard Flange Brackets:ÊFlange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 38.25Ó on center apart along the top of this weatherproof light. The mounting holes are 7.2Ó on center across the top of the light. Standard Suspension Mounting:ÊPendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4Ó NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs and tied in to the fixtureÕs lead wires, completing the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: The GAUP-24-2L-LED-SS is designed for marine, wet, damp locations where corrosion resistant lights are required or are already present. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message [email protected] for more information about our custom options tailored to meet your specific industry needs. |
Larson Electronics 28W Weatherproof LED Light - 120-277V AC, 3500 lms - SS Mounting Bracket/Clips, Vapor Proof GAUP-24-2L-LED-SS
Larson Electronics
- SKU:
- GAUP-24-2L-LED-SS
- Weight:
- 0.00 LBS