Larson Electronics 28W Solar Powered LED Light - 12V DC - Day/Night Sensor, Lithium-ion Battery - On/Off Switch - Vaporproof GVP-24-2L-LV-SOL-DNS-M1

Made in Texas

The GVP-24-2L-LV-SOL-DNS-M1 from Larson Electronics is a Vapor Proof Solar Power LED Light Fixture that is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This powerful yet compact vapor proof LED light delivers crisp, clean light while reducing operating costs. Charged by a 30 watt solar panel, one 12V AC 20aH lithium-ion battery provides constant, reliable power to the 2 tube, 28-watt fixture. This vapor proof LED solar power light is also equipped with a day/night sensor that turns the light in low-light conditions.

Light Features: This 2 foot long, 2 LED tube, vapor proof solar LED light fixture is ideal for use in remote locations requiring powerful yet compact LED lighting. The GVP-24-2L-LV-SOL-DNS-M1 features our second generation LED T-series 14 watt T17 style lamps which produce 15% more illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T-6 temperature rating. The solid state design of the LED lamps gives this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs.

Mounting
Round Pole	Square Pole	Surface

The day/night sensor is programmed to activate the solar panel in the evening and to shut it off during the day. The GVP-24-2L-LV-SOL-DNS-M1 provides 10 hours of continuous runtime when the battery is fully charged. Charging time for the battery bank is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. Indirect sunlight and low ambient light levels, such as on cloudy days, will extend the charge time.

LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps.

Power/Wiring: This GVP-24-2L-LV-SOL-DNS-M1 is powered by one 12V AC 20aH lithium-ion battery that is recharged by a 30 watt solar panel. This rechargeable battery provide a continuous supply of steady, reliable power. The battery pack is contained within the solar panel, not the light. This fixture ships with 20 feet of 12/2 SOOW cord that connects the panel to the switch and 15 feet of 12/2 SOOW cord that connects the switch to the light. Custom lengths are available upon request. Please contact us for special requirements.

Additional Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).

Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.

Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants