Larson Electronics 25KVA Power Distribution - 600V 3P Pri. - 208/120V Sec. (1) 208V Outlet - (4) 5-20 Flanged Outlets

Made in Texas The MGS-25KVA-4X120.20AFI-1X208 portable power distribution system is designed to enable operators to connect to 600V primary voltage and step it down to 208/120V to operate lights and equipment. On the secondary side, operators can connect up to four 120V, 20-amp devices and one 30-amp, 208V device. This versatile system enables operators to make the most of a single 600V, 3-phase connection via a 20` #8 SOOW line-in cord. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Operation: The #4 SOOW 20’ line-in cord brings 600V power to the 60-amp, 600V, 3-phase fused disconnect, which contains three 40-amp time delay fuses protecting the 25KVA transformer. The NEMA 3R transformer converts 600V, 3-phase power to 208/120V and passes the current to the secondary disconnect and panel. The secondary side of the transformer feeds a 40-amp disconnect, fused with three 208V, 40-amp time delay fuses protecting the secondary panel. The NEMA 3R secondary panel contains four 20-amp, 120V breakers protecting four 20-amp, 5-20R flange mount receptacles and one 30-amp breaker protecting one 2810SW, 208V receptacle. All receptacles are equipped with waterproof covers. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking polyurethane casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Click Photo to Enlarge Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MGS-25KVA-4X120.20AFI-1X208 Power Distribution System Ratings Line-In Cord: 20’ #8 SOOW w/ Blunt Cut End UL 1640 Portable Power-Distribution Equipment Primary Voltage: 600V 3P NEMA 3R Indoor or Outdoor Use Primary Disconnect: 60A Fused @ 40A Made in the USA Transformer: 25KVA 600V to 208/120V N3R Secondary Disconnect: 40A Fused @ 40A Secondary Panel: 3P 208/120 Secondary Breakers: (1) 30A (208V RCPT) & (4) 20A (120V RCPT) Special Orders- Requirements Secondary Panel Outlets: (1) 2810SW (208V) & (4) 5-20R Flanged Inlet (120V) - All w/ Weatherproof covers Contact us for special requirements Form Factor: Square tube frame w/ skid pockets, top pick eye & locking 8” casters Toll Free: 888-325-4448 Dimensions: 34”-L X 44”-W X 58”-H Intl: 1-903-270-1187 Weight: 650lbs E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase