Larson Electronics 25KVA Power Distribution - 480V to 208/120V 3P - Ten 20A GFCI Receptacles - Retention Walls

Made in Texas The Larson Electronics MPD-MRW-480V.3PH-25KVA-MLO-2W120-10X120.20A heavy duty power transformer substation converts 480 AC three phase electrical current to single phase 120V AC. This unit provides operators the ability to safely tap into and distribute 120V AC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor applications, with a fully potted transformer and NEMA 3R load center, and 1/8" walls and hinged doors to limit access to the unit. Operators can connect up to ten 20A 120V devices on 120V circuits via 5-20R GFCI protected receptacles with waterproof covers. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The Larson Electronics MPD-MRW-480V.3PH-25KVA-MLO-2W120-10X120.20A transformer provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs and any activities requiring an alternative to native power sources. Operation: Customer provided line-in cord brings 480V three phase power to the 60-amp, 480V, 3-phase fused disconnect, which contains two 60-amp time delay fuses protecting the 25 KVA transformer. The NEMA 3R transformer converts 480V three phase power to single phase 120V. The secondary side of the transformer feeds a dual circuit 120V NEMA 3R 100-amp MLO panel. This secondary panel contains ten 20-amp, 120V breakers protecting ten 20-amp GFCI duplex receptacles with waterproof hinged covers. The duplex receptacles are mounted to a flat plate backboard for easy access when connecting secondary devices. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. 1/8" metal side walls prevent children and unwanted bystanders from accessing the load center or disconnecting equipment during operation and deployment. Two 1/8" hinged doors allow operators to access the disconnect, breaker panel, and receptacles. Click Photo to Enlarge Click Photo to Enlarge Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MPD-MRW-480V.3PH-25KVA-MLO-2W120-10X120.20A Power Distribution System Ratings Line-In Cord: Customer provided UL 1640 Portable Power-Distribution Equipment Primary Voltage: 480V AC Three Phase NEMA 3R Indoor or Outdoor Use Primary Disconnect: 60A Fused @ 60A Made in the USA Transformer KVA: 25KVA 480V-3P to 120V-1P AC N3R Line Out: 120V AC 1P Secondary Panel: 100A MLO N3R Panel Secondary Breakers: (10) 20A 120V Secondary Outlets: (10) 20A GFCI Duplex w/ Hinged Covers Form Factor: Square tube frame w/ 1/8" side walls, hinged access doors, skid pockets, top pick eye & locking 8” locking casters Finish: Powdered Coated - Blue Dimensions: 34”-L X 40”-W X 58”-H Special Orders- Requirements Weight: 650 lbs Contact us for special requirements Features: Toll Free: 888-325-4448 Primary OCP: 60A @ 480V AC E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase