Larson Electronics 2500 kVA Pad Mount Transformer - 13200GRDY/7621 Primary - 480Y/277 Wye-N Secondary - Oil Cooled

The MT-PML-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 13200GRDY/7621 3 Phase Energy Efficient Pad Mount Dead Front Loop Feed Transformer from Larson Electronics is powerful, reliable and designed with the environment in mind. Suitable for both indoor and outdoor applications, theMT-PMLO-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 provides increased reliablity and protection against critical equipment failures. The lower operating costs, lower heat emissions and lower cost of ownership make this transformer ideal for a wide range of applications and businesses. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Transformer Features: With a transformer rating of 2500 kVA, the MT-PML-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 transformer is a three phase unit with a primary voltage of 13200GRDY/7621 V Grounded Wye. It also provides a secondary voltage of 480Y/277 V Wye-N. Featuring robust construction, this unit`s cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology. The MT-PML-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 is a grounded wye connection transformer and therefore must be connected phase-to-ground on a grounded wye system. This unit boasts a low cost of ownership and is highly energy efficient. Lower heat emissions mean less cooling is needed as well. The Standard NEMA Type 3R enclosure makes the unit suitable for both indoor and outdoor applications and it can be pad mounted. The unit also features Envirotemp FR3 insulating fluid and a 65¡C temperature rise. The MT-PML-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 is designed so that no excess oil heating occurs from unbalanced loads or phase loss on the primary side. Benefits: The MT-PML-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 pad mount dead front loop feed transformer offers many benefits to the consumer. Precision cut aluminum transformer winding material help to improve performance. The close tolerances used during manufacturing also eliminates burrs which hinder performance. Each core is specially coated to prevent the ingress of moisture and are electrically balanced to minimize axial forces during short circuit situations. This transformer provides owners with significant energy savings as well as offering environmental benefits. Higher efficiency not only extends the life of the transformer, but also turn into cost savings for owners in the form of lower energy bills and decreased cost of ownership. Applications: General purposes. Larson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your specifications. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information MT-PML-3P-13200GRDY.7621-2500KVA-480Y.277-N3R-FR3 Pad Mount Transformer Ratings Phase: Three Phase Listed for United States and Canada Frequency: 60 Hz KNAN Cooling Class Duty Cycle: Designed for Step-Up, Solar PV Operation Envirotemp FR3 Filled kVA: 2500 Dead Front Primary Voltage: 13200GRDY/7621 Grounded Wye Loop Feed Primary Connection: Grounded Wye Primary BIL: 95 kV Primary kV Class: 15 kV High Voltage Bushings: (6) 15 kV 200 Amp Bushing Wells w/ Removeable Studs Inserts: (6) 15 kV, 95 kV BIL Load Break Inserts High Voltage Arresters: (3) Elbow Arresters 15 kV Class, 10 kV (8.4 kV MCOV) Primary FCAN: 2 x 2.5% Primary FCBN: 2 x 2.5% Tap Changer: 100 A 5-Position Tap Changer Load Breaking Switch: 15-27 kV, 300 A 2-Position On/Off Overcurrent Protection: (3) Bayonet Fuses in Series w/ Partial-Range Current-Limiting Fuses Expulsion Fuses: (3) Bayonet Fuses Bayonet Holder: (3) Bayonet Fuse Holders Secondary Voltage: 480Y/277 V Wye-N Secondary Connection: Wye-N Secondary Class: 1.2 kV Low Voltage Bushings: (4) Integral Aluminum 20-Hole Spade Bushings IEEE K-Dimension: Loop Feed Per IEEE C57.12.34-2015 Figure 11 Specific Dimensions (Without Bails) Gauges & Fittings: Liquid Level Gauge Gauges & Fittings: Thermometer - Dial Type Gauges & Fittings: Pressure / Vacuum Gauge Gauges & Fittings: Schrader Valve Gauges & Fittings: Pressure Relief Device - 50 SCFM Gauges & Fittings: 1" Drain Valve w/ Sampler in LV Compartment Gauges & Fittings: Pressure Relief Device - 5000 SCFM, Cover Mounted Tank Accessories: (3) IEEE Standard Two-Hole Ground Pads Tank Accessories: Nitrogen Blanket Tank Accessories: Seismic Anchoring Provisions Welded to Tank Accessories: Primary Arrester Winding Material: Aluminum Efficiency Specification: None Impedance: 5.75% Nominal (Not To Exceed 6%) Cooling Class: KNAN Insulating Fluid: Envirotemp FR3 Elevation: Designed for Operation at 500` (152.4 Meters) Above Sea Level Temperature Rise: 65¡C Sound Level: NEMA TR1 Standard Nameplate: EPS Standard Notifications: Additional Nameplate (Outside LV Door) Cover: Welded Cover w/ Handhole Special Orders- Requirements Finish: Munsell Green (Munsell 7GY 3.29/1.5) Topcoat Contact us for special requirements Dimensions: - Toll Free: 888-325-4448 Weight: - Intl: 1-214-616-6180 Mounting: Pad Mount E-mail: [email protected] -Scroll Down to Purchase-