Larson Electronics 225 KVA Stationary Power Distribution Panel - 480V to 208Y/120V 3PH - 800A Breaker Disconnect

Made in Texas The Larson Electronics PDU-480D-350AD-225KVA-208Y.120-800AB power distribution substation converts 480V AC three phase electrical current into 208Y/120V AC. This stationary unit provides operators the ability to safely tap into and distribute 480V AC power. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Power Distribution Purpose and UseThe PDU-480D-350AD-225KVA-208Y.120-800AB power distribution system gives operators the ability to power their 208 volt and 120 volt equipment from a single system. On the primary side, operators connect 480 volt line-in power using a customer-provided cord. On the secondary side, operators can connect compatible equipment to a three phase 250V non-fused breaker disconnect. Operation: A customer-provided cord brings 480V power to the NEMA 3R 400-amp 600V three phase primary disconnect, which contains three 50-amp time delay fuses protecting the 225 KVA transformer, and passes 480V three phase through to the transformer. The NEMA 3R 225 KVA transformer converts 480V three phase power to 208Y/120V and passes the current to the secondary panel. The secondary side of the transformer feeds a NEMA 3R 250V three phase 800-amp, non-fused breaker disconnect. Protective Construction: Unlike many power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. Larger units are available upon request, and can be equipped with skids or trailer mounted. Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground. ~Please check all motor loads for dual rated motors that will work 208 or 240.~ Applications: This power distribution system is ideal for indoor or outdoor use and applications including, but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 888-325-4448 [email protected] to discuss your specific requirements. Specifications / Additional Information PDU-480D-350AD-225KVA-208Y.120-800AB Power Transformer Ratings/Approvals Line-In Cord: Customer Provided Max OCP Primary: 400A @ 600V Line-In Cord Cap: - Primary Voltage: 480V 3PH UL 1640 Power Distribution Equipment Primary Disconnect: 600V 3PH 400A Fused @ 50A N3R NEMA 3R Indoor / Outdoor Use Primary Panel: - Made in the USA Primary Breakers: - Primary Receptacles: - Primary Protection: Disconnect Switch Transformer: 225 KVA 480V to 208Y/120V 3PH N3R Secondary Voltage: 208Y/120V 3PH Secondary Disconnect: 250V 3PH 800A Non-fused Breaker Disconnect N3R Secondary Panel: - Secondary Breakers: - Secondary Receptacles: - Secondary Protection: Disconnect Special Orders- Requirements Form Factor: Stationary Unit Contact us for special requirements Frame Materials: - Toll Free: 888-325-4448 Dimensions: 34” X 44” X 58” Weight: 600 pounds E-mail: [email protected] Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being one-time custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.*All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* Scroll Down to Purchase